ICH331 car key programmer

Description

1. Scan function:
1. Input ID: 3417
2. Press Set button, and then a button.
3. Press key to show: COUNTER: 1 (expressed as a number of launches can be arbitrary choice 1-9 times)
FLOW: ON-UP (open the door, up key)
4. Press stop button, return 0.
5. Press Manual button.
6. Press key five times, indicating: # 2262 T24
000,000,001,000
7. Press manual button once, the cursor in the T24 T-word flash.
8. Press key to adjust matching resistor, the machine factory default for the 2.4M ohm matching resistor, and now basically is not used in mainland China (mainland generally 4.7M ohm, and the case of other matching resistor can be self-tuning, down to the lower keys are matched resistance)
9. Press manual button three times, the cursor moved to the lower right corner of the screen, this time choose to scan individual password.
10. Press 7 key to scan the first 8 code, (that is, master password, scan time to 60 minutes or so)
11. Press 8 key scan 4 yards, (that is, key-bit code, scan time to 10 minutes or so)
12. Press 9 key is the full code scan (full scan to be 2 hours or so)
13. To any of the above mentioned 7,8,9 pressed a button when the machine immediately began scanning motion, please wait patiently sweeping response to a time when the receiver, (such as soon as the receiver ring, lights flash look, receiver inside the following Electric jump about, vibration it), immediately press the stop button once, do not press the second, according to the second is the full return 0, the scanned data will not remember.
14. Press into key, then keys 5 keys to a any one key, the existence of just sweep to the yards you want to key on the machine is called three times, says it has just scanned the password stored keys to a button on the key five
15. If you press the stop button too late can be inverted back to the receiver and then the reaction time is to find the password. (Preferably by sweeping out the password to write it down for reference)
16. Press stop button return 0.
17. Press Remove button.
18. Button 1 to button 5 are adjustable to any one key out of the remote control just saved passwords, this time the scanner is quite a remote control.
19. If the Division I all-English tie in remote replicator, you can store the remote control device transferred to a remote control up, method is to put the whole front of the scanner in Chinese remote control sensor area on the receiver replicator,
Reading function:
1. Boot type ID: 3417
2. Press accept button, display READ
3. The remote sensing area on any one pressing the remote control button, the receiver after the show after the host calls out the remote control of the internal code data, please check the remote control if you can not show whether the normal use.
4. Press the stop key to exit.

Welcome to AOTO Tech Co., Ltd, Since 2006 AOTO TECH has been the key player in the automobile diagnostic tool industry. Now we are the Research & Development center and manufacturer of auto diagnostic tools. We provide better quality and service for auto diagnosis and programming products and the auto accessories. Meanwhile, OEM manufacturing service for business all over the world is appreciated. All of our customers are welcome to visit our factory. We make high focus on the customer's need and pay more attention to the quality of our products. As we just want to benefit all of our customers.

Better Products

We are willing to make more focus on the customer's need and pay more attention to the quality of our products. As we just want to benefit all of our customers. We develop and manufacture auto diagnostic tools, code readers, ECU chip tunning tools, auto ECU programmers, auto key programmers, auto diagnostic connectors, odometer correction kits, airbag reset kits, BMW&Opel diagnostic tools, VAG diagnostic tools, service interval resets, carsoft compatible interface, etc. Meanwhile, we provide OEM manufacturing for our worldwide clients.

Better Quality

With international standard control from R&D, testing and manufacturing, we are sure to provide products with best quality. Closely following ISO9141-2, ISO14230-4, QS9000, ISO9001 and TS16949, AOTO Tech will benefit our customers without any trouble of product quality.

Competitive Price

As one of the true few R&D centers and manufacturers of auto diagnostic tools in China, compared to the other suppliers, we can provide competitive price to benefit our customers, especially for large order.

Timely Delivery

We provide timely delivery to our customers. After we receive the payment, we will ship the products in 1-3 business days, and you can get the products in 4-7 business days. You can also track the delivery status through professional express website.

Technical Support & Service

We are sure to provide very good technology support and after sale service, as we have our engineers.
We are committed to providing technical support and after sale service as follow:
(1) One year for free update for the software.
(2) One year warranty for quality of all the components.
(3) We will provide technical support for free by phone or internet for whole life.

Good quality, best price and better technical support and service, make AOTO Tech Co., Ltd as your most valuable cooperator.