Add to Cart
High Pressure Centrifuge Oil Water Separator For Cleaning Up The Moisture
Centrifuge Oil Water Separator Application
1) City tap water, domestic sludge dewatering;
2) Oil drilling mud dewatering;
3) Sludge Oil Recovery;
4) Refinery sludge concentrated dehydration;
5) Distiller ‘s grains dehydration;
6) Paper, printing and dyeing wastewater separation;
7) Medical sludge dewatering;
8) Soy protein dehydration;
9) Plant oil clarification and separation;
10) Cosmetic clarification and separation;
11) Bleaching powder separation.
Centrifuge Oil Water Separator description:
The marine separator is mainly used for cleaning up the moisture
and mechanical impurity in the fuel ( Light diesel oil, heavy
diesel oil, fuel oil) and lubricating oil of ships and diesel
engine, which is good to reduce the abrasion and prolong its
service-life. The heavy diesel oil is separated by separator can
replace the light diesel oil for using so that reduce the cost of
production greatly.
The design, manufacture and inspect are accord with GB/T5745-2002
<< Marine Disk Separator>>. Stable operation, the
vibration is much lower than the national standard value. All
materials are made of stainless steel, so effectively reduce the
corrosion of separation materials.
Centrifuge Oil Water Separator advantage:
1, There are stationary centripetal pumps for heavy phase and light
phase output. Separated heavy phase and light phase are outputted
respectively by the large and small centripetal pumps which on the
top of the drum respectively. .
2, This series of separator outfits various specific gravity rings
with different diameter, which can be used according to the density
and volume of the materials.
Centrifuge Oil Water Separator Specifications:
Model | Rated Treatment | Inlet pressure (Mpa) | Outlet | Suck Journey | Outlet pressure | Motor (KW) |
KYDR204DD-23 | 1500 | ≤0.05 | ≥0.2 | ≥4 | ≥0.2 | 4 |