

Add to Cart
HR Series Double Stage Pushing Centrifuge continuously operating filtering
Double Stage Pushing Centrifuge is a type of continuously operating
filtering centrifuge, it has the advantages of automatic operating,
continuous discharging, high capacity, low power,without peak load,
fast drying, small pieces of grain, steady working, smallvibration
intensity, etc.
Main parameters
Model | HR400-N | HR500-N | HR630N | HR800-N |
Drum diameter(mm) | 420 | 500 | 630 | 800 |
Speed(r/min) | 1400-2300 | 1200-200 | 1000-1800 | 800-600 |
Pushing times(min) | 30-80 | 50-15 | 30-80 | 30-80 |
Main motor power(kw) | 15 | 45 | 55-75 | 75-90 |
Oil pump power(kw) | 7.5 | 22 | 30 | 45 |
Rated oil pressure(mpa) | 2 | 22 | 8 | 10 |
Capacity(t/h) | 2-5 | 18 | 25-30 | 35-45 |
Weight(kg) | 2050 | 3535 | 3921 | 6411 |
Outer size(mm) L*W*H | 2540*1292*1156 | 3585*1640*1156 | 3164*1510*1604 | 3660*2110*1947 |
Working principle
After drum reaching full speed, it can continuously send the
material to feeding plate through feeding pipe. Because of the
centripetal force, the material will be distributed uniformly along
circumference to filter screen installed on drum, solid phase is
hold back on the screen and forms ring-like filter cake. Solid
phase will be pushed out from drum little by little according to
the reciprocating motion of stage I drum, then discharged from
discharge spout on machine body.
Process and application
Double Stage Pushing Centrifuge is applied to separate the slurry
which has middle-size crystal or fiber particle,average grading of
solid phase 2 0.1mm,solid content (volume ratio) is 30-70%. If
change feeding and distributing type,this machine can be also used
to dry solid-phase material which is not diffluent, it has good
washing effect and large capacity.
The machine is widely used for treating hundreds of materials like:
Salt treatment of waste water (MVR), edible salt, kalium chloratum,
ammonium chloride, ammonium sulfate (flue desulfuration),
urotropin, ox bone particle(gelatin), sodium sulfate, chlorine and
alkali industry, nitrocotton, cotton seeds, glyphosate, etc.
5.Our company
Juneng Machinery (China)Co., Ltd., established in 2006, is a professional manufacturer engaged in the research, development, production, sale and service of Filter, Separator, Decanter centrifuge and pump. We have four factories which located in Nanjing and Yixing City with convenient transportation access.