Industrial Aerosol Products Mold Release Silicone Lubricant for Loosen Rust

Industrial Aerosol Products Mold Release Silicone Lubricant for Loosen Rust

Plant conveyors, guides and rails, mold release agents, vending machines, electric motors and rollers and sliding mechanisms

FEATURES:

Silicone fluid with superior lubrication and temperature viscosity characteristics. Use on all metallic and non-metallic surfaces.

Reduces friction and galling even on metal-to-metal contact areas.

1.Stops Squeaks

2.Protects Metal

3.Starts Wet Motors

4.Loosens Rusted Parts

5.Frees Sticky Mechanisms

6.Reduces Friction And Galling

7.Withstands High Pressure

8.Wide Temperature Range

APPLICATION

Plant conveyors, guides and rails, mold release agents, vending machines, electric motors and rollers and sliding mechanisms

DIRECTION

Put extension tube on the nozzle and spray it on the object, keep it soaked for several minutes for the best results.

PRECAUTIONS

Please don’t spray this product on the object contacted directly with food.2.When spraying, the can must be kept upwards and vertical,

and the angle between it and the level should be not less than 45 degrees. 3. If this product is splashed into eyes, wash them immediately

with clean water, and then seek medical advice.4.If swallow it by mistake, immediately induce vomit and see the doctor.5.Keep it out of reach

of childen.6.This product is inflammable. it must be stored below 40 degrees centigrade far away from heat and flame. it's forbidden to store

it in the hot sun or break or burn the package can. 7.The net weigh and gross weigh will be changed with time. it's normal for aerosol.

Wastage rate is not more than 2%/year.

USED CAN TREATMENT:·Turned the used can upside­down on some old newspapers or in a dustbin.Press the spray head for about 2 minutes

to eliminate the rest materiel in it.·If necessary, make a big hole in the used can to eliminate the rest contents in it .

Quality Policy

Pay attention to the whole process quality

Provide the most satisfactory products

Regard customer as the center

Establish the international first-class products

production concept

Don't accept defective products

Don't make defective products

Don’t outflow defective products

YAC Chemicals Limited was set up in 2006, specializing in daily use chemicals and fine chemical Products. We have an office in Shenzhen and a factory in Guangzhou. We have highly trained staffs. We work with many of the main packaging and raw material suppliers in China and overseas, which ensures we have a stable supply chain and have excellent product quality.
We manufacture 5 series of products: Household products, air freshener, insecticide, furniture polish; Personal Care, deodorant body spray, shave foam, hair spray; Auto Care, carburetor cleaner, multipurpose foam cleaner, car wax; Industy Care, lubricant spray, mould release agent, adhesive spray; aerosol paint, acrylic spray paint, fluorescent paint, Insulating paint. These products are sold in many countries throughout the world. Our products can be found in many major Supermarket chains.