Digital Truck Tachometer Programmer CD400 Distance Reading Clear DTC and Matched Wire
Brand Name:JIUTECH-Lucy
Model Number:for CD400
Minimum Order Quantity:1
Delivery Time:1 work day
Payment Terms:T/T, Western Union, MoneyGram
Place of Origin:CHINA
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
No.16 Building, Tongfu Industrial Park, Nanshan District, Shenzhen, China.
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
tacho programming kit for digital tachograph programmer truck tacho tool kit cd400
Item Description:
TACHOGRAPH PROGRAMMER (TACHO)
Supported languages:English, German, Spanish, French, Dutch, Portuguese, Turkish, Romanian,Syriac, Russian
Tachograph programmer (Tacho) is designed for verification,
calibration and configuration of control devices (tachograph) when
installed on vehicles. The device allows you to define the W figure
determination on measuring track or rolling road, K figure measure,
can be used as speed simulator for the tachograph when checking the
speedometer and odometer.
Supports IMS (Independent Motion Signal / Second speed signal)
parameters on DTCO 2.0, SE5000 Exakt Duo and EFAS-4.
Supports 'VDO counter' parameter on DTCO 2.0
Basically, a tachograph is a device that measures and records the
speed and distance driven by a vehicle. The data are recorded in
the form of graphics on a paper disk.The new digital tachographs
record those data on its embedded memory and also on the smartcard
of the driver.The programmer CD400 calibrates and programs all
analogue and digital .
Real shot:
A Workshop Card is required to cluster calibration the digital
Cd400 is a driving recorder, can change the odometer, support truck type
Software upgrade process:
1. Download and install the CD200-ISP software:
setup-CD200-ISP-V1-2.zip
2. Use the upgrade cable (CA-RS232-1) to connect the CD400 to the
serial port of your computer.
3. Start the CD200-ISP software.
4. Select the COM port.
5. Select. hex file.
6. Click the "Program" button.
7. Use the dash cam, DC adapter (9V to 30V) or internal 9V battery
to switch the CD400 power supply.
8. Wait for the progress bar to complete.
CD400 Package included:
1pc x CD400
1pc x Cable for CA-1319-0
1pc x Cable for CA-CROCO-0
1pc x Cable for CA-DIGITAL-0
1pc x Cable for CA-EGK100-0
1pc x Cable for CA-KTCO-0
1pc x Cable for CA-MTCO-1
1pc x Cable for CD400-RS232
1pc x Manual
CD400 Supported :
Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO
1324/1390, TSU 1391, VR2400.
Digitals: DTCO 1381 (DTCO2.1 active), SE5000 (Exakt Duo), SmarTach,
EFAS-4.
A Workshop Card is required to cluster calibration the digital
CD400 Functions:
W figure determination on measuring track (with optional
photo-cell) or rolling road.
K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
Parameter programming.
Activation and deactivation of IMS (Independent Motion Signal).
Activation and deactivation of VDO counter.
reset and (mileage correction).
Speed simulation and customizable automatic test diagram.
DTCS reading (Digital) and erasing.
Sensor pairing (KITAS activation).
Clock test.
Workshop card's PIN recording and input through CD400.
CD400 Advantages:
No power connection nor battery charging required, the only tester
powered by the itself.
Compact size, the smallest tester on the market.
User friendly, clear 4 lines menus, no training required.
Automatic model detection on power on.
Double accuracy of the W factor measure on track by detecting half
pulses.
The only tester being able to reset the and change the sender type
on the VR2400.
Flash program memory, easy software upgrade using a serial port or
USB serial adapter on any PC.
CD400 Technical Specifications:
Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)
White LED backlight
Size: 150 x 100 x 45 mm
Supply voltage: 9 to 30 VDC
Supply current: 12mA
est: green-blue ABS (IP40).
Operating temp: -20...+70°C
Weight: 155g
Digital Truck Tachometer Programmer CD400 Distance Reading Clear DTC and Matched Wire
Inquiry Cart
0