

Add to Cart
Micro control ware monitoring Line Interactive UPS Load LED HP5110E 12V / 7Ah for POS
Key Features:
1. Microprocessor control guarantees high reliability
2. Advanced line-interactive design
3. Intelligent voltage regulation technique
4. Intelligent charging technique
5. User-replaceable battery design
6. Complete soft ware monitoring system
7.Well-adapted to the environment
Wide input voltage range 165V±5V-275V±5V, avoid switching to the AC
model frequently, extend the useful life of the battery , reduce
the cost of changing battery , adapted to the environment where the
power system is bad.
8.Load safely
Automatically regulate the voltage, ensure the load work under safe
voltage range
9.DC START function
Built-in DC start function enables UPS to be started up without AC
Power supplied
10.Strong electromagnetism compatibility
Adopted the advanced wide range frequency input technique,
frequency range 40-70Hz, enable the UPS work normally when the AC
frequency drifts. Provides the UPS with better compatibility with
various generators and reduce the cost for purchasing generator.
11.High Optimizing Performance for battery
Advanced battery management, Automatically regulate the cut-off
voltage of the battery according to the load capacity. Extending
the useful life of the battery and improving the UPS efficiency.
12.Unattended Mode function
When the UPS cut off in low battery voltage which caused by AC
fault , it will automatically charge the battery when the AC
recover, this function will protect the battery effectively, extend
the useful life of the battery and can recover the battery back-up
time in a short time
13.Full protection
Protection for low battery voltage, over load, output short circuit
and over- temperature. Restrain surge interference, eliminate
noise, protection for thunder striking. Reduce the risk of damaging
customer’s equipment and the loss of losing data; Save the cost and
time for maintainance.
Back Panel Description of line interactive UPS HP5110E 600-2000VA
Applications
Ideal for PCs, Workstations and POS systems
Technical Specifications of line interactive UPS HP5110E 600-2000VA
Model | HP5110E 600-2000VA | |||||||||
600VA | 800VA | 1000VA | 1400VA | 2000VA | ||||||
Capacity | 600VA/ 360W | 800VA/ 480W | 1000VA/ 600W | 1400VA/ 840W | 2000VA/ 1200W | |||||
Nominal voltage | 220/230/240VAC | |||||||||
Nominal frequency | 50/60Hz | |||||||||
Input | ||||||||||
Voltage Range | 165VAC-275VAC(±5VAC) | |||||||||
Frequency Range | 40-70Hz | |||||||||
Output | ||||||||||
Voltage Regulation | 220/230/240VAC±2% | |||||||||
Frequency Regulation | Battery model:50/60Hz±0.1Hz AC model:Auto sense | |||||||||
Wave form | Modified sine wave | |||||||||
Switch time | <10ms(Typical 5ms) | |||||||||
Battery | ||||||||||
Battery type and number | 12V/7Ah× 1pcs | 12V/7Ah× 1pcs | 12V/7Ah× 2pcs | 12V/7Ah× 2pcs | 12V/7Ah ×2pcs | |||||
Dispaly | ||||||||||
LED | Display AC, Battery, Load, Over-load, Fault, etc | |||||||||
Communication | ||||||||||
Communication port | RS232 port, USB port(Optional) | |||||||||
Operating Environment | ||||||||||
Temperature | 0℃~40℃ | |||||||||
Humidity | 5%~95%(<40℃, no condensation.) | |||||||||
Storage Temperature | -25℃~55℃ | |||||||||
Elevation | Less than 1500 meter | |||||||||
Noise (within 1 meter) | <45dB | |||||||||
Physical | ||||||||||
Weight(KG) | Net weight | 6 | 6.5 | 9.6 | 9.7 | 9.8 | ||||
Gross weight | 8 | 8.5 | 11.6 | 11.7 | 11.8 | |||||
Dimension: WXDXH mm | 330×100×140mm | 405×205×145mm |
Follow standard of GB/IEC regulation: EMC:GB7260.2/IEC62040-2
GB/17626.2~5/IEC61000-4-2~5 SAFETY:GB4943
Note: Product specifications are subject to change without further
notice