10000L/H RO Drinking Water Treatment Reverse Osmosis System High Pressure

Brand Name:Sunswell
Certification:CE SGS
Model Number:RO
Minimum Order Quantity:1 set
Delivery Time:60 days after receiving down payment
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Verified Supplier
Address: Dongli Road, Donglai, Zhangjiagang, Jiangsu 215600, China
Supplier`s last login times: within 47 hours
Product Details Company Profile
Product Details

Hot Sale RO Drinking Water Treatment System with Price Water Treatment Machinery for Pure Water


Water treatment system is widely used in preparation of water for beverage industry, which features adaptable of different salt content of water, easy operation, less labor force and low running cost.


Pre-treatment System


Pre-treatment system is composed of mechanical filter, active carbon filter, Ion Exchanger and precision filter. The water
temperature requires 25±30C.


Flocculator is used for destroying electro-neutral of colloid in water, which ensures raw water can reach to the requirement of Silt Density Index (SDI) ≤ 4. Mechanical filter can remove most of suspension, colloid and grain impurity, which can ensure initial purification of water.

If some of raw water comes from tap water, chlorine content maybe is higher. Low-pressure compound RO membrane has strict limitation to chlorine and organism, which must be ≤0.1mg/1.

Because calcium and magnesium content in raw water is very high, and RO salt-removing rate is about 97%, which may cause deposit of calcium carbonate, magnesium carbonate, bitter salt, etc. on concentrated water side. Deposit adhered on RO membrane surface and may block passage of components and causes pressure difference increase, water output decrease and salt-removing rate decrease, which influence normal running and usage span of RO. So before precision filter, Ion Exchanger is equipped to protect and avoids impurity on RO concentrated water side.

RO System

RO system is composed of high-pressure pump, RO system and chemical cleaning device.

During running, RO membrane may form some deposit and chemical cleaning device is equipped for periodical cleaning to ensure stable running of RO system. This system configures with membrane compounds and high-pressure pump.

High-pressure pump is the power source of RO system. To RO system on sound running condition, high-pressure pump equips inlet/outlet pressure switch. When inlet pressure is less than set value (water lack P≤0.05Mpa) or outlet pressure is higher than set value, pressure switch send signal to PLC programming system and high-pressure pump and RO system will stop in avoidance of destroying to RO membrane because of water pressure.

RO system pressure control and automatic cleaning are controlled by PLC. RO system can wash surface of RO membrane by low-pressure timely and periodically.

Specifications


MODELDBC10000
(L/hr) RATED CAPACITY10000
(20℃)GAS MULTIPLES2.5V/V
ADJUSTMENT RATIO1:3--1:6
MIXED PRECISION2%
(Mpa) INLET PRESSURE OF CARBON DIOXIDE0.6-1.0
(Nm3/hr) Theoretical consumption of carbon dioxide8(1.0Mpa 0)
Inlet diameter of carbon dioxide1/2”
(Mpa) inlet pressure of compressed air0.5-0.8
(Nm3/hr) Compressed air consumption0.5(0.5-0.8Mpa)
Compressed air inlet diameter1/2”
(L/hr) Treatment water supply12000
() Processing water temperature20
(Mpa) inlet pressure of treated water0.15-0.25
inlet diameter of treated waterDN50
(L/hr) Processing syrup supply3000
() Processing syrup temperature20
(Mpa) Processing syrup inlet pressure0.15-0.25
inlet diameter of Processing syrupDN32
(Mpa) Material outlet pressure0.65
() Material outlet temperature5-6
Material outlet diameterDN50
(L/hr) Refrigerant circulation60000
() Refrigerant inlet pressure-3
(Mpa) Refrigerant inlet pressure0.2-0.25
Refrigerant inlet outlet diameterDN100
(KW)Heat transfer350
(380V 50Hz)power16
Dimension3265X2100X3500
(Kg) weight4500

China 10000L/H RO Drinking Water Treatment Reverse Osmosis System High Pressure supplier

10000L/H RO Drinking Water Treatment Reverse Osmosis System High Pressure

Inquiry Cart 0