

Add to Cart
Automatic Security Drop Arm Turnstile Barrier Gate For Entrance Access Control
Drop arm gate, it is designed to allow passage of wheel chair, pushing prams or passage with big luggage, mainly used in mall, market etc.
System function :
1. Use SS304 stainless steel for the whole case, and adopt
anti-damp, dust-proofing, water-proofing international standard
design.
2. Based on standardization design, use laser cropping and cutting,
instant-formation Technology, mechanized wire drawing technology,
modularized docking, convenient for work piece loading and
unloading and also for maintenance, a high level of parts
exchanging.
3. Use 2mm stainless steel for the whole case, durable and
reliable, free distortion.
4. The panel of the barrier uses high-intensity material, logo on
the panel can be customized.
5. Stand alone infrared photocell can be applied.
6. International electrical interface, can be connected to the 3rd
party read/write device, including: IC/EM reader, Bar-code paper
ticket system, fingerprint reader, 3D face recognition device etc.
7. The Flap will open automatically during power interruption.
8. The operation speed of the panel can be adjusted on the control
board according to the circumstance and passing speed.
Technical parameters :
Description | Arm drop turnstile | |
Type | single flap | double flap |
Power consumption | 50W | |
Housing Size | 700*300*1010 mm | |
Housing material | 1.5--2mm, 304# stainless steel, corosion resistant | |
Drive motor | DC brushless motor | |
Channel width | ≤1150mm | |
Pass speed | 40 persons/min. | |
Communication Interface | RS485 | |
Input signal optional | DC12V level signal or DC12V pulse signal | |
Flap open against power off (with capacitor) | Optional | |
Working enviroment temperature | -30℃ to 70 ℃ | |
Working environments | indoor, outdoor | |
Relative humidity | ≤95% coagulation free | |
MCBF | 1,000, 000 cycles |