IR2010-02BG High Precision Air Filter Lubricator Regulator Gas Source Assembly
Brand Name:SMC
Certification:CE
Model Number:IR2010-02BG
Minimum Order Quantity:1 piece
Delivery Time:within 1-7 working days after payment
Payment Terms:T/T , Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Ningbo Zhejiang
Address:
Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
IR2010-02BG High Precision Air Filter Lubricator Regulator Gas
Source Assembly
Ordering Code: IR2000-02BG, IR2010-02BG, IR2020-02BG, Any other types please contact freely.
(Note 1) In the standard mounting position, the product name plate
is attached to the front and the bracket is mounted to the back
when viewed with the SUP side on the left and OUT side on the
right.
(Note 2) Accuracy: ±3%F.S.(full span) Accuracy guarantee
temperature range : 23±5%
(Note 3) The pressure gauge is not attached and becomes bundled
shipment.
(Note 4) One type only.
Foreword
The IR1000 precision regulator (hereinafter referred to as the
“product”) has excellent relief characteristics, and is constructed
to always keep a constant pressure even if used with a reverse
flow. The product has the following features.
1. A sensitivity of 0.2%F.S. at max is achieved by the nozzle and
flapper design. “F.S.” is the abbreviation of full span.
2. Relief characteristics are improved.
3. Various characteristics such as flow rate, pressure
characteristics and repeatability are improved compared to general
regulators.
4. The adjustment range is as wide as general regulators, which is
0.01~0.8MPa. (IR1000 is 0.005MPa~)
Specifications
| Model | IR2000 | IR2010 | IR2020 |
| Fluid | Compressed air (dry air) | ||
| Max. supply pressure | MAX. 1.0MPa | ||
| Min. supply pressure(1) | Setting pressure + 0.05MPa | ||
| Setting pressure(2) | 0.005~0.2MPa | 0.01~0.4MPa | 0.01~0.8MPa |
| Setting sensitivity(3) | Within 0.2% F.S.(4) | ||
| Repeatability(5) | Within 0.5% F.S.(4) | ||
| Air consumption(6) | 4.4L/min(ANR) or less (at supply pressure of 1.0MPa) | ||
| Ambient and fluid temperature | -5 to 60℃ (No freezing) | ||
| Port size | Rc1/4 | ||
| Port size of pressure gauge | Rc1/8 [2 places] | ||
| Weight | 0.3kg | ||
(Note1) Minimum supply pressure: At a downstream side flow rate of
zero. Be sure to keep the minimum supply pressure. (setting
pressure+0.05MPa)
(Note2) Setting pressure: At a downstream side flow rate of zero.
(Note3) Setting sensitivity: This is the minimum pressure range
that the downstream pressure is adjustable by conducting fine
adjustment of the setting knob on the downstream side of the
precision regulator.
(Note4) The F.S. means the condition at the maximum setting
pressure of the product.
(Note5) Repeatability: This is the reproducibility of the
downstream pressure at every operation (ON/OFF) on the downstream
side. The repeatability does not consider the influence of pressure
variation due to aging deterioration, temperature change or
oscillation of the regulator. The aging deterioration means that
the downstream pressure varies gradually affected by change or
distortion due to aging of the internal components of the precision
regulator.
(Note 6) Air consumption: This is the combined flow to atmosphere
of the bleed and exhaust ports; when the supply pressure is 1.0 MPa
and the downstream setting pressure is 0.8 MPa (maximum setting
pressure). It does not include any flow for the relief of
downstream pressure increases due to back pressure or downstream
pressure decreases due to a change of the adjustment of the setting
knob.
Operation
(1) Do not use a precision regulator outside the range of its
specifications as this can cause failure.
(2) Screw a panel nut with the recommended proper torque 12.5Nm
when mounting onto a panel. Looseness or faulty sealing will occur
if tightening torque is insufficient, while thread damage will
result if the torque is excessive.
(3) If a directional switching valve (solenoid valve, mechanical
valve, etc.) is mounted on the supply side of the regulator and
repeatedly switched ON and OFF, wear of the nozzle/flapper section
will be accelerated and a discrepancy in the setting value may
occur. Therefore avoid using a directional switching valve on the
supply side. In the event a directional switching valve will be
used, install it on the output side of the regulator.
(4) The accessory pressure gauge is supplied with the regulator in
the unassembled status. Before using the regulator, be sure to
install the pressure gauge at the gauge port of the regulator. At
this time, the recommended tightening torque of the pressure gauge
is 7 to
9Nm.
(5) Air is normally released from the bleed hole (the two hole on
the side of the body’s mid-section). This is a necessary
consumption of air based on the construction of the precision
regulator, and is not an abnormality.
(6) Make sure to tighten the lock nut after pressure adjustment.
(7) There may be oscillation of the set pressure or noise depending
on the pressure conditions, piping conditions and ambient
environment. In this case, it is possible to improve the problem by
changing the pressure conditions and piping conditions. If the
problem is not improved, contact your SMC sales representative.
(8) After supplying pressure from the upstream side or adjusting
the set pressure, the set pressure may vary gradually over time due
to changes in the internal components. If the variation in the set
pressure becomes large, adjust the set pressure again by adjusting
the setting knob.
(9) Changes in the ambient temperature or fluid temperature may
result in changing the set pressure. If this occurs, stabilize the
ambient temperature and fluid temperature properly.
Operating environment
1. Do not use in an environment where corrosive gases, chemicals,
sea water, water or steam are present.
2. The product should not be exposed to prolonged sunlight. If used
in direct sunlight, install a protective cover.
3. Do not use in a place where there are heat sources around the
product and it can receive radiant heat.
4. Employ suitable protective measures in locations where there is
contact with water drop-lets, oil or welding spatter, etc.
5. Do not operate in a location subject to vibration or impact. It
may cause malfunction.
Product show
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL
will be normal ways. If you require use of a courier, we can do it.
After-sale Service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
Competitive Advantage
| Our product features | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We
will contact suppliers or Manufactory for Warranty. Buyers Might
Need to pay the Shipping fee For resend the replaced item.
IR2010-02BG High Precision Air Filter Lubricator Regulator Gas Source Assembly
Inquiry Cart
0