

Add to Cart
80MM BW200 Mud Pump With Large Flow And Stable Operation
Introduction of 80MM BW200 Mud Pump With Large Flow And Stable Operation
The 80mm BW200 mud pump is mainly used to supply flushing fluid for
drilling in geology, geothermal, water source, shallow oil and
coalbed methane. The medium can be mud, clean water, etc. it can
also be used as the above infusion pump.
80mm BW200 Mud pump is a kind of machinery that transports mud or
water and other flushing fluid to the borehole during drilling,
which is an important part of drilling equipment.
The commonly used mud pump is piston type or plunger type. The
power engine drives the crankshaft of the pump to rotate, and the
crankshaft drives the piston or plunger to do reciprocating motion
in the pump cylinder through the crosshead. Under the alternate
action of suction and discharge valves, the purpose of pressing and
circulating flushing liquid is realized.
Characteristic of 80MM BW200 Mud Pump With Large Flow And Stable Operation:
1. Solid structure and good performance
The structure is firm, compact, small in volume and good in
performance. It can meet the requirements of high pump pressure and
large displacement drilling technology.
2. Long stroke and reliable use
Long stroke, keep in a low number of strokes. It can effectively
improve the water feeding performance of mud pump and prolong the
life of vulnerable parts. The structure of the suction air case is
advanced and reliable, which can buffer the suction pipeline.
3. Reliable lubrication and long service life
The power end adopts the combination of forced lubrication and
splash lubrication, which is reliable and increases the service
life of the power end.
Technical specifications of of 80MM BW200 Mud Pump With Large Flow And Stable Operation
Pump type | horizontal |
Action type | double action |
Number of cylinders | 2 |
Cylinder liner diameter (mm) | 80; 65 |
Stroke (mm) | 85 |
Reciprocation times (times / min) | 145 |
Displacement (L / min) | 200;125 |
Working pressure (MPA) | 4,6 |
Transmission shaft speed (RPM) | 530 |
V-belt pulley pitch diameter (mm) | 385 |
Type and groove number of V-belt pulley | type B × 5 slots |
Transmission power (HP) | 20 |
Suction pipe diameter (mm) | 65 |
Drainage pipe diameter (mm) | 37 |
Overall dimension (mm) | 1050 × 630 × 820 |
Weight (kg) | 300 |