

Add to Cart
Description:
On vehicle models from the E65 on, BMW is for the first time using
fibre-optic cables as standard for communication between control
units.
The optical buses are notable for their high data transmission rate
and they are not susceptible to electromagnetic interference. The
optical buses in question are the MOST bus, primarily used for
in-car entertainment electronics, and the byteflight bus, which
serves predominantly safety-critical functions.
OPPS has been designed for encoding, individualising and
programming ( CIP) via the Software Service Station (SSS) and
envisaged for use as part of the BMW diagnostic system (DIS) from
DISPlus and Group Tester One (GT1). It is intended for testing and
programming tasks from the E65 series, taking the place of the
diagnostic head.
Specification:
1.OPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring
pro-cedures are possible, as no measuring technology is
incorporated; in this instance, OPPS / OPS is used predominantly
for programming control units (flashing). Communication with the
vehicle can be performed both via the MOST and via the OBD
interface. The OBD interface is required for the power supply to
the OPPS / OPS and has communication properties via which the
vehicle can be identified and the data to be programmed can be
determined. From CIP version 7.0, it is possible to delete fault
code memories via OPPS / OPS.
2.OPS with DIS for diagnosis Supported Models:
Vehicle interface via OBD-II socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, E85,
E86, E38(OBD-II), E39(OBD-II ), E46(OBD-II ), E52, E53, R56, R50,
R52, R53
3.OPS with SSS for programming Supported Models:
(1) Vehicle interface via OBD-II socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, R56,
R50, R52, R53
(2) MOST compatibility ( multichannel programming):
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, R56, R50,
R52, R53
Package including:
1. OPS multiplexer(Orange Head)
2. OBD-II diagnostic cable
3. LAN cable
4. OPS MOST cable
5. Hard disk
FAQ:
Frequently Asked Question
Q: How to update this product?
A: This product update is through hard disk.You can send the old
hard disk back to us and we install the new software in the hard
disk and send back to you.You only have to pay the shipping cost
for this update.
Q: What is the difference between OPS and OPPS?
A: This two product almose the same function.Compared with OPS,the
quality of OPPS better.
Q: Does this BMW OPS support an old models like E36,E34 and E39?
A: You can download the car model that BMW OPS support from our
website.It can works on E36 E34 E39.
Q:What is the difference between two hard disks with fit all
computer and T30 laptop?
A:1.The hard disk fit IBM T30,that means this hard disk only can
used on IBM T30 laptop.for those customer who do not have IBM T30
laptop,if you want to use this hard disk,you have to purchase one
IBM T30.The version for this hard disk is DIS V57,SSS V39.
2.The hard disk is fit all laptops.The advantage is it do not have
much demand on laptop,only require your laptop support USB 2.0. But
this one software installation need pay a little bit attention.the
installation maunal you can download from our website. The version
for this hard disk is DIS V55 SSS V32.
3.Compare this two version hard disk,the hard disk fit IBM T30
speed may more fast and stable.We suggest this one to those who
have IBM T30.