ASME SA213 Stainless Steel Seamless TP304L Bend U Boiler Tube
Brand Name:YUHONG
Certification:ISO9001-2008, API 5L, API 5CT
Model Number:ASME SA213 / ASTM A213
Minimum Order Quantity:10PC
Delivery Time:10-70 days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Ningbo Zhejiang China
Address:
20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Supplier`s last login times:
within 3 hours
Product Details
Company Profile
Product Details
ASME SA213 Stainless Steel Seamless TP304L Bend U Boiler Tube
YuHong can offer SA213/A213 seamless stainless steel bend U tubes
and we sell these products with highest quality in more than 70
countries.
ASME SA213 / ASTM A213 This specification covers seamless ferritic and austenitic steel
boiler, superheater, and heat-exchanger tubes, designated Grades
T5, TP304, etc.
U tubes are manufactured by bending straight tubes. Bending is done
cold on an automatic U-bend. To ensure tube wall thinning and
diameter ovality are controlled, tube bending is accomplished with
a mandrel inserted into the tube. What's more, the U-bend of the
U-tube is stress relieved under controlled conditions and cycles
for extended life.
Specifications
| Sizes / Thickness | Sizes and thicknesses usually furnished to this specifification are
1 ⁄ 8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside
diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in
minimum wall thickness or, if specifified in the order, average
wall thickness. | ||||
| Manufacture | Tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. | ||||
| Heat Treatment | seamless tubing immediately following hot forming may be
individually quenched in water or rapidly cooled by other means,
provided that the temperature of the tubes after hot forming is not
less than the minimum specifified solution temperature (direct quenched). | ||||
| Length | As required by clients | ||||
| Surface Condition | 1.Cold-fifinished steel tubes shall be free of scale and suitable
for inspection. A slight amount of oxidation is not considered
scale. 2.Hot-fifinished steel tubes shall be free of loose scale and
suitable for inspection. 3.Stainless steel tubes shall be pickled free of scale.When bright
annealing is used, pickling is not necessary. | ||||
| Bending Radius | From 1.5*OD(Outside Diameter) To 1500mm, ≤1.5*OD,necessary To agree precision of geometrics | ||||
| Straight Tubes | max length 35000mm | ||||
Test Required Bend U tube
1.Corrosion Test
2.Chemical Analysis
3.Mechanical Tests: Flattening test, Flaring test, Flange test, Hardness Test and Hydrostatic test
4.Reverse-bend and Re. flat tests
5.Eddy Current Testing
6.Hydrostatic Testing
7.Air Under Pressure Test
8.Visual Inspection
Chemical Composition S30403
| Chemical Composition | C≤ | Mn≤ | P≤ | S≤ | Si≤ | Cr | Ni |
| 0.035 | 2 | 0.045 | 0.03 | 1 | 18-20 | 8-12 |
For small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.040% is necessary in Grades TP304L.
Mechanical Property
| Steel Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Hardness max |
| TP304L | 485min | 170min | 35min | 192HBW/200HV 90 HRB |
Applications Industry
Pharmaceutical Equipment
Off-Shore Oil Drilling Companies
Chemical Equipment
Power Generation
Sea Water Equipment
Petrochemicals
Heat Exchangers / Condensers / Boiler
Gas Processing
Specialty Chemicals
Pulp and Paper Industry
ASME SA213 Stainless Steel Seamless TP304L Bend U Boiler Tube
Inquiry Cart
0