EP2C20256C7N - Altera Corporation - 1. Enhanced Configuration Devices (EPC4, EPC8, and EPC16) Data Sheet
Brand Name:Altera Corporation
Certification:Lead free / RoHS Compliant
Model Number:EP2C20256C7N
Minimum Order Quantity:5 PCS
Delivery Time:2-3 days
Payment Terms:T/T in advance, Paypal, Western Union
Contact Now
Add to Cart
Verified Supplier
Address:
R-62852 Golconda Electronic Market ,Zhenhua Road ,Futian District .SZ.CN.518031
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Quick Detail:
Enhanced Configuration Devices (EPC4, EPC8, and EPC16) Data Sheet
Description:
The Altera enhanced configuration device is a single-device,
high-speed, advanced configuration solution for very high-density
FPGAs. The core of an enhanced configuration device is divided into
two major blocks: a configuration controller and a flash memory.
The flash memory is used to store configuration data for systems
made
up of one or more Altera FPGAs. Unused portions of the flash memory
can be used to store processor code or data that can be accessed
via the external flash interface after FPGA configuration is
complete. Table 1–1 summarizes the features of Altera configuration
devices and the amount of configuration space they hold.
Applications:
This chapter describes the EPC4, EPC8, and EPC16 enhanced
configuration devices (EPC).
■ Single-chip configuration solution for Altera® ACEX® 1K, APEX™
20K (including APEX 20K, APEX 20KC, and APEX 20KE), APEX II, Arria®
GX, Cyclone®, Cyclone II, FLEX® 10K (including FLEX 10KE and FLEX
10KA), Mercury™, Stratix® II, and Stratix II GX devices
■ Contains 4-, 8-, and 16-Mbit flash memories for configuration
data storage
■ On-chip decompression feature almost doubles the effective
configuration density
■ Standard flash die and a controller die combined into single
stacked chip package
■ External flash interface supports parallel programming of flash
and external
processor access to unused portions of memory
■ Flash memory block/sector protection capability via external
flash interface
■ Supported in EPC16 and EPC4 devices
■ Page mode support for remote and local reconfiguration with up to
eight
configurations for the entire system
■ Compatible with Stratix series Remote System Configuration
feature
■ Supports byte-wide configuration mode fast passive parallel
(FPP); 8-bit data output per DCLK cycle
■ Supports true n-bit concurrent configuration (n = 1, 2, 4, and 8)
of Altera FPGAs
■ Pin-selectable 2-ms or 100-ms power-on reset (POR) time
■ Configuration clock supports programmable input source and
frequency synthesis
■ Multiple configuration clock sources supported (internal
oscillator and external clock input pin)
■ External clock source with frequencies up to 100 MHz
■ Internal oscillator defaults to 10 MHz; Programmable for higher
frequencies of 33, 50, and 66 MHz
■ Clock synthesis supported via user programmable divide counter
■ Available in the 100-pin plastic quad flat pack (PQFP) and the
88-pin Ultra FineLine BGA® (UFBGA) packages
■ Vertical migration between all devices supported in the 100-pin
PQFP package
■ Supply voltage of 3.3 V (core and I/O)
■ Hardware compliant with IEEE Std. 1532 in-system programmability
(ISP) specification
■ Supports ISP via Jam Standard Test and Programming Language
(STAPL)
■ Supports JTAG boundary scan
■ nINIT_CONF pin allows private JTAG instruction to start FPGA
configuration
■ Internal pull-up resistor on nINIT_CONF always enabled
■ User programmable weak internal pull-up resistors on nCS and OE
pins
■ Internal weak pull-up resistors on external flash interface
address and control lines, bus hold on data lines
■ Standby mode with reduced power consumption
For more information about FPGA configuration schemes and advanced
features, refer to the appropriate FPGA family chapter in the
Configuration Handbook.
Specifications:
Product Photos | 256-FBGA Pkg |
Product Training Modules | Three Reasons to Use FPGA's in Industrial Designs |
Standard Package | 90 |
Category | Integrated Circuits (ICs) |
Family | Embedded - FPGAs (Field Programmable Gate Array) |
Series | Cyclone® II |
Number of LABs/CLBs | 1172 |
Number of Logic Elements/Cells | 18752 |
Total RAM Bits | 239616 |
Number of I /O | 152 |
Number of Gates | - |
Voltage - Supply | 1.15 V ~ 1.25 V |
Mounting Type | Surface Mount |
Operating Temperature | 0°C ~ 85°C |
Package / Case | 256-BGA |
Supplier Device Package | 256-FBGA (17x17) |
Catalog Page | 569 (CN081 PDF) |
For Use With | P0528-ND - BOARD DEV DE1 ALTERA |
Other Names | 544-1659 |
Competitive Advantage:
Warranty :180 days !
Free shipping: Order over $1000 win a free shipment fee
(goods weight below 3Kg) ,during 20130901-20130930 .
Why buy from us >>> Fast / Safely / Conveniently
• Mega Source is a Stock keeper and trade company of Electronic
components .Our branches office include China, Hong Kong, Sigapore
, Canada . Offer business, service, resourcing and information for
our global member.
• Goods are ensured the highest quality possible and are delivered
to our customers all over the world with speed and precision.
How to buy >>>
• Contact us by email & sent your inquire with your Transport
destination .
• Online chat, the commissioner would be responded ASAP.
Service >>>
• Forwarder Shipment to world-wide, DHL ,TNT ,UPS,FEDEX etc. buyer
don`t need to worry about shipping problem
• We will try to respond as quickly as possible. But due to time
zone difference, please allow up to 24 hours to get your mail
replied. The products were tested by some devices or software, we
ensure that there is no quality problems.
• We are committed to providing fast, convenient and safe
transportation service to global buyer.
EP2C20256C7N - Altera Corporation - 1. Enhanced Configuration Devices (EPC4, EPC8, and EPC16) Data Sheet
Inquiry Cart
0