

Add to Cart
Quick Detail:
Single-chip 8-bit microcontroller
Description:
The 80C552/83C552 (hereafter generically referred to as 8XC552)
Single-Chip 8-Bit Microcontroller is manufactured in an advanced
CMOS process and is a derivative of the 80C51 microcontroller
family. The
8XC552 has the same instruction set as the 80C51. Three versions of
the derivative exist:
• 83C552—8k bytes mask programmable ROM
• 80C552—ROMless version of the 83C552
• 87C552—8k bytes EPROM (described in a separate chapter)
The 8XC552 contains a non-volatile 8k × 8 read-only program memory
(83C552), a volatile 256 × 8 read/write data memory, five 8-bit I/O
ports, one 8-bit input port, two 16-bit timer/event counters
(identical to the timers of the 80C51), an additional 16-bit timer
coupled to capture and compare latches, a 15-source,
two-priority-level, nested interrupt structure, an 8-input ADC, a
dual DAC pulse width modulated interface, two serial interfaces
(UART and I2C-bus), a “watchdog” timer and on-chip oscillator and
timing circuits. For systems that require extra capability, the
8XC552 can be expanded using standard TTL compatible memories and
logic.
In addition, the 8XC552 has two software selectable modes of power
reduction—idle mode and power-down mode. The idle mode freezes the
CPU while allowing the RAM, timers, serial ports, and interrupt
system to continue functioning. The power-down mode saves the RAM
contents but freezes the oscillator, causing all other chip
functions to be inoperative.
The device also functions as an arithmetic processor having
facilities for both binary and BCD arithmetic plus bit-handling
capabilities.
The instruction set consists of over 100 instructions: 49 one-byte,
45 two-byte, and 17 three-byte. With a 16MHz (24MHz) crystal, 58%
of the instructions are executed in 0.75µs (0.5µs) and 40% in 1.5µs
(1µs). Multiply and divide instructions require 3µs (2µs).
Applications:
• 80C51 central processing unit
• 8k × 8 ROM expandable externally to 64k bytes
• An additional 16-bit timer/counter coupled to four capture
registers and three compare registers
• Two standard 16-bit timer/counters
• 256 × 8 RAM, expandable externally to 64k bytes
• Capable of producing eight synchronized, timed outputs
• A 10-bit ADC with eight multiplexed analog inputs
• Two 8-bit resolution, pulse width modulation outputs
• Five 8-bit I/O ports plus one 8-bit input port shared with analog
inputs
• I2C-bus serial I/O port with byte oriented master and slave
functions
• Full-duplex UART compatible with the standard 80C51
• On-chip watchdog timer
• Three speed ranges:
– 3.5 to 16MHz
– 3.5 to 24MHz (ROM, ROMless only)
– 3.5 to 30MHz (ROM, ROMless only)
• Three operating ambient temperature ranges:
– PCB83C552–5: 0°C to +70°C
– PCF83C552–5: –40°C to +85°C
(XTAL frequency max. 24 MHz)
– PCA83C552–5: –40°C to +125°C
(XTAL frequency max. 16 MHz)
Specifications:
part no. | S87C552-5K68 |
Manufacturer | |
supply ability | 10000 |
datecode | 10+ |
package | PLCC |
remark | new and original stock |
Specifications:
part no. | S87C652 |
Manufacturer | |
supply ability | 10000 |
datecode | 10+ |
package | PLCC |
remark | new and original stock |