Non-touched Sonicator Cell Disruptor / Ultrasonic Probe Sonicator

Non-touched Sonicator Cell Disruptor / Ultrasonic Probe Sonicator

The ultrasonic cell disruptor can prepare emulsoid of 1/100 micron, homogenize mixture

hard to be mixed polymerize some matters and separate out some other.

Generally speaking, it can process various functions such as distillation, smash,

emulsification, homogenization, soliquoid, aberrance, aerosol,quicken up exsolution and crystallization

and preparing different kinds of biological samples under an electron microscope.

Disposing of organic and inorgani compound safely and efficiently

Mainly used for crush of virus and bacterium of the cell and tissue of the various of animal or plant,

crush and combination again of the various of inorganic compound.

Used in emulsification,separation, even,recovering and chemical reaction acceleration etc.

Widely used in the field of biochemistry,microbiology, pharmacology,medicine and etc.

Specification:

Type: CCH-3538L-20

Full-length(mm): 310

Frequency(KHZ): 20

Resonnce Impedance: 15-30

Capacity (pF)±10%: 10000

Power(W): 750

Type: CCH-1624F-20

Full-length(mm): 310

Frequency(KHZ): 20

Resonnce Impedance: 15-30

Capacity (pF)±10%: 4000

Power(W): 100

Characteristic

1. The digital display and control, convenient and accurate.

2. Regular time setting button (4), the left two keys to set minutes of increase and decrease,

the right of the two key set seconds of increase and decrease

3.The "Pulse" : works display window. In the intermittent work way is divided into two parts:

the left two shows that intermittent way. Pulse width, the range of 0.1 ~ 9.9 seconds,

by ", "said. In "continuous" works shows the "Cont."

4. The intermittent work way of "duty cycle" set button.

Two key set for intermittent mode pulse width on the left.

Two key way of intermittent intermittent time setting key on the right.

5.Mode ": continuous output work Mode or" pulse output "work Mode selection button.

Remark: use the intermittent work way can prevent the accumulation of excessive heat in the liquid,

and because the material to be able to accumulate after each pulse cluster probe oscillator,

so can provide a more effective treatment results.

6. “Start/Stop” Work start or stop button.

7. “Intensity display”:The intensity of ultrasonic output display window, display range of 0 ~ 100%.

8. “Max.intensity”:Ultrasonic output intensity limit knob, a total of 4, 20%, 35%, 60% and 100% respectively.

Note: as a strong power output will damage the amplitude of small diameter,

so please select a location according to the following requirements:

9. “Intensity” :Ultrasonic output intensity, can be in "the intensity of ultrasonic

output restrictions" knob selected range from 0 ~ 100% range adjustment.

10. “Tune” :Ultrasonic output frequency tracking finetuning hole, generally do not need to adjust,

but after the user to replace the amplitude may need to be adjusted a little.

11.“Stand by”: Overheating protection lamp, when the temperature sensor is detected

by the temperature too high, the indicator light will flash, the host will cease to work,

the normal work of the host, the indicator light is not bright.

12: "POWER" : the POWER switch, from one side of the "ON" to connect the POWER,

ON the other side to shut off the POWER.

Specification parameter

Type Power(w ) Optional luffing rod Handle Sample Weight Plus duty cycle work

UH-100A 100 1/8″3/16″1/4″ 100ul~ 80ml 1%~99%

UH-250A 250 1/8″3/16″1/4″ 100ul~ 200ml 1%~99%

UH-500A 500 1/8″3/16″1/4″1/2″ 250ul~ 500ml 1%~99%

UH-800A 800 3/16″1/4″1/2″3/4″ 250ul~ 800ml 1%~99%

UH-950A 950 3/16″1/4″1/2″3/4″ 250ul~ 1000ml 1%~99%

UH-1200A 1200 3/16″1/4″1/2″3/4″ 50ml~ 1200ml 1%~99%

Established in 1999, Beijing Cheng-cheng Weiye Science and Technology Co., Ltd is a professional manufacturer specializing in ultrasonic transducers, ultrasonic apparatus and piezoelectric ceramics.
Notably in 2004, we researched and developed our ultrasonic tubular transducer equipment into a new product that turns the extreme inconvenience brought about by pipeline and vacuum cleaning into an easy task. This product has been widely used in distillation, mix and mill for various chemical procedures and has received much praise from our customers.
Our headquarter is located in Beijing, China. Our manufacturing base is in Baoding, Hebei province. Cheng-cheng Weiye also has two branches in Shenzhen and Zhangjiagang and two sales agents in Japan and the USA. At present, there are five departments of the company comprising R&D, Production, Domestic Sale, Export and After-sales service.
We have close cooperation with the Institute of Acoustics, Chinese Academy of Sciences, Tsinghua University and other scientific research institutes and work together with many renowned experts in the ultrasonic industry within China. With a microcomputer control processing center and possession of advanced power ultrasonic inspection equipment (HP-4294A for example), our R&D capacity in the field of ultrasonic products is superior to that of our competitors.
All of our products are manufactured according to the ISO standard, ensuring our product quality and we were also awarded RoSH certification.
We energetically develop international markets while keeping our products in a strong competitive position with a large share of the domestic market. Currently, our products are exported to the United States, Australia, France, Slovakia, Turkey, Singapore, India and Hong Kong and other locations.
Relying on our strong technical ability in research and development in professional ultrasonics, we ensure our customers can feel confident in buying "Cheng-cheng Weiye" products.
We would like to create, together with you, a bright future in the ultrasonic application field.