440V AC SPD Type 2 , Single Line Lightning Protection Device

40KA Single Line Type 2 Surge Protection For power supply in communication station

Lightning protection of power supply system of communication station

(1) Underground power cables are used for the power lines leading into the communication equipment room, and both ends of the cable metal sheath are well grounded.

(2) The high-voltage side of the distribution transformer is connected to a high-voltage zinc oxide surge arrester, and the low-voltage side is connected to a power surge arrester. The transformer case and the ground of the arrester shall be connected to the grounding grid in a unified manner and shall be well grounded.

(3) The power supply in the communication room adopts multi-level surge protection measures. A 380V overvoltage protector is connected in parallel to the AC bus; a high-frequency switching power supply is connected to a 380V overvoltage protector in parallel; a varistor is connected to the entrance of the -48V power supply. The positive pole of the power supply of the communication equipment is connected to the grounding bus on the power supply side and the equipment side respectively.

(4) The power supply of communication equipment in the substation is installed in the main control room together with other substation equipment due to the lack of communication equipment. The DC power supply is taken from the 220V DC operating power supply of the substation, and transformed into -48V power supply by the DC/DC module for communication equipment. Therefore, install a first-level 380V/100G AC overvoltage protection device on the AC busbar of the electric cabinet used in the substation as a first-level lightning protection; install a first-level AC overvoltage protection device at the inlet of the high-frequency switching power supply, and The 48V output side of the DC/DC module is equipped with a primary 48V DC surge protection; finally, a 48V varistor is installed at the 48V entrance of the communication equipment.

(5) All AC and DC power distribution cabinets in the computer room are protected by grounding. The AC protective grounding wire is directly drawn from the grounding bus. It is strictly forbidden to use the neutral wire as the AC protective grounding wire.

OBV5-C40
The surge arrestors OBV5-C40-LT meet the type 2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from an overload, the internal cut-off unit disconnects the arrestor from the mains if necessary. In addition, the QR code printed on the arrestor allows disary. In addition, the QR code printed on the arrestor allows direct access to the online installation instructions.
Technical Parameters

Feature&Benefits

1,Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.
2,Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against
lightning induced surges.
3,Enhanced surge protection.
4,For mounting on 35mm DIN rails acc. to EN 60715.
5,It can effectively ensure the equipments work properly.
·Easy installation or retrofit.
·Din-rail mountable.
·Fail-safe /self-protected designRemote indicator (optional) with 3pin NO/NC contact.
·IP20 finger-safe designVisual indicator.
·Small foot print.

Application
●AC/DC distribution
●Power supplies
●Industrial automation
●Telecommunications
●Motor controls systems
●PLC applications
●Power transfer equipment
●HVAC applications
● AC drives
●UPS systems
●Security systems
●IT/Data centers

Others
Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):

Transient voltage surgesin lv power lines
Transient overvoltages are voltage surges that can reach tens ofkilovolts with a duration of the order of microseconds.Despite theirshort duration, the high energy content can cause serious problemsto equipment connected to the line, from premature aging to destruction, causing disruptions to service and financial loss.Thistype of surge can have various different causes, including atmospheric lightning directly striking the external protection(lightning rods) on a building or transmission line or the associatedinduction of electromagnetic fields on metallic conductors.
Outdoor and longer lines are the most exposed to these fields,which often receive high levels of induction.
It is also common for non-weather phenomena, such as transformer centre switching or the disconnection of motors orother inductive loads to cause voltage spikes in adjacent lines.

Importance of theground connection
Overvoltage protectors (SPD) divert excess energy toground, so limiting the peak voltage to an acceptablevalue for connected electrical equipment.
A ground connection in adequate condition is, therefore,a key aspect for effective protection against overvoltages.Monitoring ground connection condition guaranteesproper operation of surge protection devices.

Uchi was established in 2006 in Dongguan, China.

After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, surge protector and protective devices of lightning protection products. It ranks front in the industry and has heartquarter in Hong Kong. With its excellent technology and quality products, Uchi has won wide recognition of overseas customers. Saini Impex PVT.LTD is our authorized sole distributor in india .

China's leading enterprise of circuit protection components​

Our strength ：

A large number of product series in our factory have passed the certification of various international standards




Factory Tour​ ：

Advanced equipment, lean production

Uchi boasts with a production base that covers an area of nearly 15000 square meters.

We successively imported high-tech fully automated production equipments and high precision testing instruments and have put into production to realize the automation, large scale and standardization.

Uchi has a galaxy of hi-tech talent teams headed up by national class experts to engage in the work of product development, product quality control, sales andservice technical support, etc., and has successively obtained tens of certificates of appearance patents, utility patents and inventions.

To guarantee the quality, we successfully passed the certification of ISO9001:2008 quality management system, scientific and efficient managing mode to carry out lean production and form scientific and efficient quality control system. The products are certified with UL, CUL, TUV, VDE, CSA and SGS, RACH 73 environmentally friendly testing certifications.

Exquisite quality at customers' favor

Uchi is an export membership of Alibaba with free import and export rights. It is appraised as Guangdong Famous Star Enterprise and Dongguan Private Enterprise. Our products have doubled and redoubled to provide more kinds and high quality and reliable products and service. Our products mainly consist of:

Metal Oxide Varistor
DIP Varistor & SMD Varistor
Thermally Protected Varistor

DC-Link Capacitor for New energy vehicles supporting the HEVEV

Automotive Fuse Links for EV Plugin HEV FCEV
PTC Thermistor

NTC Thermistor

PPTC Resettable Fuse

Thermal Fuse

Auto Blade Fuse

Glass Fuses

Metal Film Resistor

Carbon Film Resistor

Cement Resistor

NTC Temperature Sensor

CDS Photoconductive Cell

Our products are widely used in New energy vehicles, home appliance, medical equipment, office equipment, communication equipment, phone battery, electronic calendar, electronic thermometer and temperature controller to cover military telecommunications, IT, automobile and consumer electronic fields.
Cooperation with good faiths to win in the market.
Excellent quality sincere service is the key to the success of Uchi.

In the future Uchi will still stick to the tenets of "Quality first, customer foremost." "First class quality, first class service and customersatisfaction" to manufacture the high quality, technically advanced and reasonable prices products. We hope to trigger with global partners the revolution in resistor products. We cordially welcome friends from home and abroad to visit us for guidance and cooperation.