PFA membrane for PTFE Copper clad , PFA film for Iron floor

PFA membrane for PTFE Copper clad , PFA film for Iron floor

PFA film is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property. It can be solid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature is up to 260 and is an ideal material for circuit board and flat cable.

Applicaton :

Bonding Material
To bond PTFE fiber glass tape,PTFE conveyor,Tent lap
PTFE sheet welding film

Iron baseboard fabrication

Mid adhesive layer of PTFE Copper clad

Dielectric
Te be the basic material of high temperature adhesive tape

Capacitor insulation
Lining Material of anticorrosive

Release film

Window film

Biology Copious cooling Protective material

Non-metallic compensator used in thermal power plant

Anti-explosion electric motor

Surface protected material

Semiconductor assembly material

Properties :

High low temperature resistance:
-200--260°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:

Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).

None stick to water ,oil : water contact angle: θ=115^o
Electric reliability,High dielectric
60HZ-60MHZ , Under the high and low temperature,the permittivity keeps 2.1 even if the surface damaged ,it won’t has conductive track.

Volume resistance>10¹⁸ΩM
Surface resistance>2*10¹³Ω
Voltaic Arc Resistance >165s No electric leakage
Weather resistance: It can be used in sunlight and ozone long
Anti-corrosion :Only in high temperature, Fluorin and alkalis can effect it,others acid, alkali or ester won’t effect it.

Fireproof : If firing, and will still insulate .

High diaphaneity

UL-Resistance : Good penetrability in ultraviolet radiation,and lowest refraction coefficient

Technical index of PFA:

Specification

MOQ: width :50-300mm 20kgs

width:300-1000mm 100kgs

Color can be customiszed . Surface treated can be done (chemical or plasma treated)

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1.Conductive film

ITO transparent conductive film

Copper grid transparent conductive film

Metal sputtered polycarbonate film

Touch screen and touch sensors

2.PDLC switchable film and glass,and car solar film

3.Printing film

Texutred hardcoated PET film

Printing grade Polycarbonate film

4.Insulation film

UL V0 polycarbonate film

UL V0 Polyester film

General electrical insulation PET film

Fluoro products and parts

ETFE film and PVF film

Perfluorinated ion exchange film

PVDF PIEZO film and sensors

Battery barrier film

5.Rugged TFT LCD display module and mainboard

Professional services need the service providers to be professional. Different from many other companies