

Add to Cart
XGS28 self-propelled Telescopic Mobile Elevating Work Platform
Max. working height at 28.2m,
max. payload at 340kg,
max. gradeability at 45%;
this vehicle is structured as three sections of telescopic arms and
tower arm mechanism, with a small fly jib, featuring wide work
range. Dual payload control system is adopted to adjust the work
range depending on the payload, meeting the different loading
requirements and thus becoming an ideal selection in the
construction of building, bridges, steel structures and stadiums.
Product Highlights:
* 4m wide platform, enough for carrying tools and materials.
* The jib is enable to fly over some obstacles and thus to reach
the inaccessible position.
* Dual payload control system could adjust the work range by itself
according to the payload, meeting the different loading
requirements.
* The boom and the upright are luffed and raised at the same time
with one single cylinder, speeding up the approaching of work area,
making the construction more effective, suitable for the relatively
low and narrow site.
* Maintenance-free shaft bushing and slider could ease the friction
at each articulated point and slider and better the adaptation to
the welding and dusting environments, as well as greatly dropping
the fault ratio and the service life of complete vehicle.
* The power system integrates the electronic-control engine, the
oil pressure sensor, the coolant temperature sensor, the rpm sensor
and other. Safe and reliable ECU is equipped with fault diagnostic
port, making the fault diagnosis and maintenance easier.
project | Unit | parameter |
Overall length of the machine | mm | 12300 |
full width | mm | 2490 |
Overall height | mm | 3050 |
wheelbase | mm | 3000 |
maximum working height | m | 28.2 |
maximum platform height | m | 26.2 |
Maximum working range | m | 23 |
Maximum carrying weight (unlimited/limited) | kg | 300 (unlimited) / 460 (limited) |
Boom luffing range | ° | —5~75 |
Turntable rotation angle (continuous) | ° | 360 continuous |
maximum tail swing | mm | 1600 |
Platform size | mm | 2400×900×1150 |
Platform rotation angle | ° | 160 |
Total Weight | kg | 18300 |
top speed | km/h | 6.1 |
Minimum turning radius (outside) | m | 6.7 |
Minimum turning radius (inside) | m | 3.6 |
Maximum gradeability | % | 40 |
engine model | - | Yuchai YCF3065-T302 / Yuchai YCF3065-T482 / Cummins QSF2.8t3TC71 |
Engine rated power | kW | 48 / 48 / 53 |
Photos
Other Construction machinery can be provide according to your
request, freely contact me for the informations and quotations.
Any needs, please contact us:
OFFICE TEL:0086 531 59536616 008613210589366
MAIL:sinotruk@road-machine.com
International Market:Ethiopia/Africa/Uganda/Chad/Zambia/Tanzania/Liberia/Myanmar
/Cambodia/Thailand/Malaysia