Pipe Positioners Pipe Rotators for Welding , Rotary Welding Table

Pipe Positioners Pipe Rotators for Welding , Rotary Welding Table

Quick Detail:

Positioners provide steel fabrication shops with the most up-to-date equipment for placing bulky fabrications in the ‘downhand’ position in the shortest possible time without the use of cranes and manpower. The positioners tables rotate at accurate and constant variable speeds and tilt through 135° with a high C.G. load rating covering almost all anglers for welding any angular job placed on it. Positioners can be supplied for interfacing with Column and Boom Manipulator.


Description:

The equipment mainly consists of drive rotator, idler rotator and electrical control system etc. Drive rotator

is made up of base, pedestal, rollers and drive device, idler rotator without drive device.

1:pedestal and roller base are welded structure, all the strength of the weld seam according to

requirements such as welding, heat treatment after welding were annealed to remove internal stress and

effective prevention of welding deformation.

2:Drive device located on the two roller beds of the droved rotator, Drive device are consist of reducer

and motor. The reducer adopts the special design gear and wheel reducer and which made by our

company, with high transmission efficiency, large output moment. Drive unit droved by AC frequency

conversion motor, and through reducer, thus drive the roller turning. The turning speed is VFD, and the

speed can be adjusted in the range of 100-1000mm/min, and it can realize different welding requirement

of different size work piece. Both drive and idler rotator equipped with traveling unit, easy for operating,

and the idler unit with manual lock device, it can quick lock rotator on the rail. On the base of drive rotator

equipped with a set of traveling motor, and traveling consists by two bevel gear reducer and two 1.5 KW

motor, gear and wheel couple, and the drive and idler rotator droved on the rail by bevel gear reducer and

gear and rack couple, traveling smoothly and convenient operating.

3:The rollers are all Polyurethane material and without metal. Roller center distance can be adjusted to

realize different size workpiece. When adjusting, just move the position of symmetrical roller seat, then

fixed by bolts, easy and convenient, also with large anti-wallop strength..

4:The equipment side of the idler rotator fitted with a mechanical gear wheel, gear wheel fixed in the holder

with the rotating cylinder, while the rotation of power, to meet the welding requirements of different size

cylinder workpiece, to prevent the shifting of the workpiece in the welding process holder behind the

installation of a locking device to prevent the roller frame roll.

5:Electric control system mainly consists of electric control box and remote panel. There are inverter, relay,

terminal etc in the control box. Power switch is mounted on the door of electric control box. The alarm

indication, alarm clear button on the panel of control box; the remote panel has roller forward, backward,

stop button.

Applications:

This bolt adjustable welding rotator is produced according to MMBEI Standard ZBJ33003-1990.

Self-design and manufacture combined the advantages of oversea competitors and requirements of

domestic and overseas customers. It is suitable for automatic welding of circular seam cylinder, with

advantages of practical, reliable, stable and easily operates etc. It is widely used in the range of job

cutting, polishing, assemble etc.. It is one of ideal equipments of improve automaticity and efficiency.

Specifications:

Competitive Advantage:

• Robust all steel fabrication
• Variable or single speed table rotation through 360°
• Square or round table as desired. with T slots and concentric rings to facilitate fast and accurate alignment and clamping.
• Power Operated Table tilting mechanism through 135°, including limit Switches to prevent over-run.
• Centre spindle carried in sealed pre-loaded Timken bearings or, depending on capacity Large diameter crossroll bearing is provided.
• Accurate machine cut steel gears.
• Efficient built-in earthling. Totally enclosed electrical motors including electromagnetic breaks.
• Pendant remote push button controls for all movements, together with speed potentiometer

Ronniewell established since 2007 .We have built our expertise through years of experience. This enables us to produce equipment suitable for almost the entire spectrum of industrial welding and cutting needs.

Ronniewell's range of activities includes consultation, design, manufacture, install and provision of services mainly to Oil & Gas Installations, Constructors and Heavy Engineering and Steel Structure Fabricators.

Comprehensive range for sale:

• CNC flame/plasma cutting machine;
• Welding Rotators, Welding Turning Rolls;
• Welding Positioners & Welding Head and tail stocks;
• Welding Column & Boom Manipulators;
• Horizontal turntables;
• Welding Fit Up rotator & Growing Lines;
• Specialist handling welding rotators & welding positioners for Riser Lines, Pipe Shops, Pile Racks, Double Jointing, and Wind tower Production solutions.
• H-beam production lines;
• Edge milling machine.

Our vision is based on a long term strategy. This means that we are increasing our design and production capacity and we are strengthening our sales and after sales team to be able to serve you in the best possible way.