ATmega328P-AU CH340G Chip UNO R3 Development Controller Board With USB Cable
Brand Name:OKYSTAR
Model Number:OKY2001
Minimum Order Quantity:10 piece
Delivery Time:1-3 work days after payment
Payment Terms:T/T, Western Union, MoneyGram, L/C, D/A, D/P,
Place of Origin:Guangdong China(Mainland)
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Room1105, Block B, Chinto Technology Building, Minzhi Road, LongHua, ShenZhen city, GuangDong province, China
Supplier`s last login times:
within 38 hours
Product Details
Company Profile
Product Details
ATmega328P-AU CH340G Chip UNO R3 Development Controller Board With
USB Cable
Description:
The Uno board Clone is a microcontroller board based on the
ATmega328. It has 14 digital input/output
pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16
MHz ceramic resonator, a USB
connection, a power jack, an ICSP header, and a reset button. It
contains everything needed to support the
microcontroller; simply connect it to a computer with a USB cable
or power it with a AC-to-DC adapter or
battery to get started.
Open circuit diagram of the original design, the development of
software interface for free download, can also be in accordance
with the requirements and their modified, download the program is
simple and convenient. Can simply use sensors, all kinds of
electronic components connection (such as: LED lights, buzzer,
buttons, photoresistance, etc.), make all sorts of interesting
work.Microprocessor controller, using high-speed development
interface and the environment are very simple and easy to
understand, very suitable for beginners to learn.
Specification:
| Input Voltage (recommended) | 7-12V |
| Digital IO pins | 14 (of which 6 provide PWM output) |
| Analog input pins | 6 |
| DC Current per I/O Pin | 40 mA |
| USB Port | type B USB |
| Clock Speed | 16 MHz |
| Operating voltage | 5V |
| Input Voltage (limits) | 6-20V |
| The largest output current | 800 mA |
| Pack Size | 12cm*12cm*8cm |
| Board Weight | 36g |
| Cable Weight | 25g |
The power pins are as follows:
• VIN. The input voltage to the Arduino board when it's using an
external power source (as opposed to
5 volts from the USB connection or other regulated power source).
You can supply voltage through
this pin, or, if supplying voltage via the power jack, access it
through this pin.
• 5V. The regulated power supply used to power the microcontroller
and other components on the
board. This can come either from VIN via an on-board regulator, or
be supplied by USB or another
regulated 5V supply.
• 3V3. A 3.3 volt supply generated by the on-board regulator.
Maximum current draw is 50 mA.
• GND. Ground pins.
Package Include
1pc ATmega328P-AU CH340G Chip UNO R3 Development Controller Board With
USB Cable
More Product:
| UNO R3 + breadboard 400 point + 9V battery snap Starter Learning Kit |
| ||
| Mega 2560 R3 ( CH340G ) | HC-SR501 Human body Pyroelectric Infrared sensor PIR | ||
| DC 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Test Module | Ultrasonic Sensor HC-SR04 | ||
| LCD 1602 I2C module (Yellow Green light) ( Red board module) | 20cm Male TO Female 40Pin Solderless Jumper Breadboard Wires |
FAQ:
1. What is the delivery time?
Normally, 1-5 workdays after payment;
Special requirement orders, delivery time is negotiable.
2.If the products can’t work after receiving it,what should I do?
We will replace new items for you at once, and respect your final
decision for wrong goods.
3.If the products don’t meet my demand after I received it,can I
return it?
Yes,no problem.
You can return back to us, we will refund your full payment.
ATmega328P-AU CH340G Chip UNO R3 Development Controller Board With USB Cable
Inquiry Cart
0