50kn Automatic Universal Tensile Testing Machine 0.1~300mm/Min Speed

Lab Equipment 50kn Electronic Automatic Universal Testing Machine Tensile Test

Applications

1. Tested sample: laminated materials, wood, leather, rubber & plastic, metal material, etc.

2. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force.

3. Deformation under defined load: Test deformation under defined load of tested sample

4. Load under defined deformation: Test load under defined deformation of tested sample

5. Software can issue word/excel report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.

Standard Features

SOFTWARE – TM 2101

User setting page

Curves display picture

Test result picture

Test curve page

HAIDA TEST EQUIPMENT TEST STANDARDS FOR SHARING
Adhesives Tape/Pressure Sensitive Tape
ØEN 1719: Loop Tack Test
ØASTM D3654: Shear Adhesion Test
ØASTM D3759: Tensile &Elongation Test
ØFTM: 180&90 Degree Peel Test, Loop Tack
ØEN 1939, ASTM D3330: 180&90 Degree Peel Test
ØISO 11339, ASTM D1876, ASTM F2256: T-type Peel Test

Adhesive
ØASTM D903: Peel & Stripping Test
ØASTM D1002: Shear Strength (Adhesive for metal to metal)
ØISO 4587: Tensile lap-shear strength (Rigid-to-rigid bonded assemblies)

Film/Plastic Film
ØASTM D882: Tensile Test
ØASTM F1306: Puncture Test
ØASTM D1938: Trouser Tear Test
ØASTM D2732: Thermal Shrinkage Test
ØASTM D1709, ISO 7765-1: Free-Falling Dart Method
ØASTM D1894: Static and Kinetic Coefficients of Friction
ØASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test

Plastic& Plastic Pipe
ØISO 180: Izod Impact Test
ØISO 9966: Ring Stiffness Test
ØISO 179: Charpy Impact Test
ØISO 4892: Weathering Aging Test
ØASTM D3163: Plastic Lap-Shear Test
ØISO 4422, ISO 3127: Pipe Impact Test
ØASTM D4565, ISO 11357, EN 728: DSC/OIT
ØISO 75: Heat Deflection Temperature (HDT)
ØASTM D1598: Hydrostatic Pressure and Burst Test
ØISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)
ØASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test
ØISO 306, ASTM D1525: Vicat Softening Temperature (VST)
ØASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test

Rubber
ØASTM D412, ISO 37-2005, JIS K6251, DIN 53504-2009: Tensile Strength & Elongation Test
ØASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test
ØASTM D624-00, ISO 34-1: Tearing strength Test
ØASTM D395-03, ISO 815-1: Compression Set Test
ØASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D
ØASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test
ØISO 2781(Method A): Density Test
ØASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter
ØASTM D1646: Mooney Viscometer

Foam
ØASTM D3574 Test E, ASTM D1623, ISO 1798: Tensile Test
ØASTM D3574 Test F, ISO 8067: Tear Test
ØASTM D3574 Test A: Density Test
ØASTM D3574 Test B1, ISO 2439: IFD Test
ØASTM D3574 Test H: Resilience (Ball Rebound) Test
ØASTM D3574 Test I3: Dynamic Fatigue Test by Constant Force

Metal
ØASTM E8, EN 10002-1,ASTM A370: Tensile Test
ØASTM A370: Bend Test
ØASTM B-117, ISO 3768: Salt Spray Test
ØISO 6508: Rockwell Hardness Test
ØISO 6507: Vickers Hardness Test
ØISO 6506, ASTM E10-14: Brinell Hardness
ØASTM E23, ISO 148: Impact Test

QUALITY ASSURANCE
1. The guarantee period with FOC within 1 year (not including expendable parts cost and transport & travel fees)
1.1 During the guarantee period, Haida shall supply free maintenance or replacement for the damaged part (just for non-expendable part) caused by non-human reasons;
1.2 If any quality problems occur within the guarantee period, and Haida must provide on-site service, the transport and travel expense shall be borne by buyer;
1.3 If any big quality problems occurs out of the guarantee period, Haida will provide a maintain service, the transport and travel expense shall be borne by buyer, also charge for a favorable price for new parts;
1.4 Haida will provide a lifetime favorable price to the buyer for expendable & non-expendable parts used in system operation, equipment

maintenance;

2. The following conditions need to be paid reasonably even in the guarantee period:
2.1 Natural disaster
2.2 Operating mistakes
2.3 Voltage is not fit for our manual
2.4 Uninstall without our guides
2.5 Damaged for borrowing to others
2.6 Damaged for without authorized machine modification
2.7 Damaged for without authorized calibration
2.8 Without authorized transshipment mistake

3. Attentions: the machine cannot be used following situations:
3.1 Vibration, rocking place.
3.2 Direct sunlight.
3.3 Hot, dusty, damp places.
3.4 To ensure safe, AC supply of the machine should be well grounded.
3.5 Do not use strong solvents (such as: benzene, nitro oil) washing machine.
3.6 Do not inject water and debris into the machine to prevent damage to electrical components and electrical shock.
3.7 Machine’s disassembly and debugging can only be measured by the State Department approved the units and the company, other people not allowed to overhaul.

Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as paper&packaging test equipment, Furniture test equipment, material mechanics test equipment, optical measurement equipment, environmental reliability testing equipment etc. With the persistent efforts of all staff, Haida owned 4 factories with total 60,000 square meters, 15 branch offices covers South China, North China, East China, Central China and Northwest China, as well over 20 overseas after-sales service sites covers Southeast Asia, Europe, North America and the Middle East with over 28,000 customers.

Haida main business scope includes equipment production, non-standard equipment customization, software development, measurement and maintenance consulting services. The company has passed ISO9000 certification and multiple certifications by internationally renowned testing organizations such as BV, SGS, TUV, and its products comply with GB, ISO, ASTM, EN, JIS, TAPPI, ISTA, DIN, BS and other domestic and foreign standards. Meanwhile, invested a large amount of research and development funds to adhere to the product concept of R & D , sales and products reserve to walk at the forefront of the industry. Moreover Haida participated in composing of furniture test standards and commonly drew up CY/T229-2020 industry standards with the National quality inspection, jointly developed industry test equipment with the National Paper Products Center and Dongguan Quality Testing Furniture Laboratory, co-built the reliability laboratory with many well-known enterprises, and Jointly built the dangerous articles packaging laboratory with Guangdong Huangpu Customs Technology Center.

Haida adheres to the vision of "To be the World Class Testing Equipment enterprise" and attaches importance to platform construction and talent reserves. Having 630 employee which contain 150 technicians and more than 300 bachelors, 5 Masters, and 3 PhDs. Haida have won 2 national invention patents and over 100 utility model patents, At the same time, established 5 industry-university-research cooperation bases with universities and research institutes and invited more than 20 doctoral supervisors as consultants.

Looking forward to the future, Haida will fulfill the mission of "Deliver the best testing equipment to our customers" and adhere to the core values of "Creative, Efficiency, Inheritance, Passion and Persistence". Taking a green, low-carbon, and environmentally friendly sustainable development path, Haida will continuously optimize the product structure to realize the transformation and upgrade of the enterprise itself. It is the eternal pursuit of Haida people to build Haida into a comprehensive provider of testing equipment with advanced technology, excellent quality, high-quality service, and win-win cooperation!