1664 Pcs BGA132RDT Test Aging Cabinet Environmental Test Equipment

1664 Pcs BGA132RDT Test Aging Cabinet Environmental Test Equipment

Overview of Equipment Functions:

1, BGA aging board 26 sets, each set p ut 64 BGA132 particles, full load test that is 1664 pcs;

2,Power supply AC/DC12V 650W, 64pcs, can meet the power of each product: 5V, 2A test;

3,Each aging board can be switched by pushing and pulling independently, which can realize the disassembly and installation of pellets outside the oven box;

4, internal temperature hot air circulation, from the left and right sides into, the middle of the top return air;

5,The left and right sides have fully automatic fresh air inlets, when the temperature of the inner box products exceeds the temperature, the middle extractor fan forcibly

When the temperature of the product in the inner box exceeds the temperature, the middle extractor fan will be forced to extract air;

6,The temperature monitoring point of the inner box is 4 ways, the upper, middle, and lower part of the display, the main control temperature point is 1 way;

Aging Cabinet Control Methods and Features:

1,Performance: Balanced temperature control system (BTC), PID mode control SSR, so that the heating of the system is equal to the heat loss, so it can be used stably for a long time.

2,Temperature range: RT+15℃～100℃

3,Temperature fluctuation:±1℃

4,Temperature uniformity: no load ±2℃, with load ±5℃

5,Rate of temperature rise: 5℃/min (room temperature +5℃ and 100℃±2℃)

6,Time setting: 0~9999H can be set arbitrarily

Machine Sheet Metal Structure:

1,Material of the inner box: SUS # 304 foot 1.2 thick stainless steel plate

2,Outer box material: cold-rolled steel plate, galvanized anti-rust treatment, with high-grade resin baking paint coating

3,Insulation material: hard imported rock wool (Cecil 120K rock wool)

4. Heater: finned heat sink tubular stainless steel heater (Taiwan Taizhan nickel-chromium alloy wire)

Air Supply Circulation System:

1,Circulation motor 2 sets (Taiwan high-temperature motor)

2, diameter Ø19 extended stainless steel shaft length 180mm

3, 10.5-inch multi-wing type high-temperature resistant wind wheel (special customized by the famous factory)

4,Adjustable side blowing air outlet and return air outlet with the protection net

5,Cold air input in the duct, automatic pneumatic valve control

6,Over-temperature forced exhaust air blower forced exhaust device

Circuit Control System:

1,Temperature controller: original Taiwan Willing LCD programmable temperature controller, with a PC communication function

2,Screen display function: temperature setting (SV) and actual (PV) value directly displayed

3,Sensor: high precision Taiwan Songqi PT100 type temperature sensor

4,Temperature control: output power is calculated by a microcomputer to achieve a high precision control effect

5,Timing function: 0-9999H/M/S. With long time timing, constant temperature timing, untimed selection switch and time to automatic stop function

Safety Protection Devices:

1,Temperature over-temperature protection function

2,Motor over-current protection

3,Electricity leakage protection

4, Phase loss protection

5, Power overload protection

6, Sound and light alarm

Air Conditioning System:

• air conditioning method: forced ventilation internal balance of temperature regulation method (BTC). This method means that the heating system is working continuously, and the control system is according to the set temperature point through the PID automatic operation The output results to control of the output of the heater, and finally achieve a dynamic equilibrium state.
• Air circulation device: inside and outside fresh air adjustable air inlet and outlet, circulation duct, and long shaft centrifugal extract fan, using efficient energy regulation system, through the efficient ventilation fan for effective exchange, to achieve the purpose of temperature change. By improving the air flow and the ability to exchange heat with the heater and air table cooler, the temperature uniformity of the chamber is greatly improved.

Electricity Supply System:

List of Main Configurations:

Environment & Facilities:

1,Operating ambient temperature ≤35℃

2,Water pressure for supply and drainage: None

3,Air supply air pressure: No 13

About Company:

Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as paper&packaging test equipment, Furniture test equipment, material mechanics test equipment, optical measurement equipment, environmental reliability testing equipment etc. With the persistent efforts of all staff, Haida owned 4 factories with total 60,000 square meters, 15 branch offices covers South China, North China, East China, Central China and Northwest China, as well over 20 overseas after-sales service sites covers Southeast Asia, Europe, North America and the Middle East with over 28,000 customers.

Haida main business scope includes equipment production, non-standard equipment customization, software development, measurement and maintenance consulting services. The company has passed ISO9000 certification and multiple certifications by internationally renowned testing organizations such as BV, SGS, TUV, and its products comply with GB, ISO, ASTM, EN, JIS, TAPPI, ISTA, DIN, BS and other domestic and foreign standards. Meanwhile, invested a large amount of research and development funds to adhere to the product concept of R & D , sales and products reserve to walk at the forefront of the industry. Moreover Haida participated in composing of furniture test standards and commonly drew up CY/T229-2020 industry standards with the National quality inspection, jointly developed industry test equipment with the National Paper Products Center and Dongguan Quality Testing Furniture Laboratory, co-built the reliability laboratory with many well-known enterprises, and Jointly built the dangerous articles packaging laboratory with Guangdong Huangpu Customs Technology Center.

Haida adheres to the vision of "To be the World Class Testing Equipment enterprise" and attaches importance to platform construction and talent reserves. Having 630 employee which contain 150 technicians and more than 300 bachelors, 5 Masters, and 3 PhDs. Haida have won 2 national invention patents and over 100 utility model patents, At the same time, established 5 industry-university-research cooperation bases with universities and research institutes and invited more than 20 doctoral supervisors as consultants.

Looking forward to the future, Haida will fulfill the mission of "Deliver the best testing equipment to our customers" and adhere to the core values of "Creative, Efficiency, Inheritance, Passion and Persistence". Taking a green, low-carbon, and environmentally friendly sustainable development path, Haida will continuously optimize the product structure to realize the transformation and upgrade of the enterprise itself. It is the eternal pursuit of Haida people to build Haida into a comprehensive provider of testing equipment with advanced technology, excellent quality, high-quality service, and win-win cooperation!