

Add to Cart
1, Model :CCEC Cummins KTA19-G8, 4-cycle
2, Air Intake System :Turbo, Water/Air cooling
3, Fuel System :PT type fuel pump, EFC
4, Cylinder Arrangement : 6 in line
5, Standby Power:520KW / 650KVA
IP23 Air Cooling Cummins Diesel Genset , 520KW / 650KVA
Standby Power(50Hz) | 520KW / 650KVA |
Dimension & Weight
Standard Configuration (Open Type) |
Overall Size: 3500(mm)×1570(mm)×2050(mm) |
Weight: 4500kg |
General Features: |
Engine (CCEC Cummins KTA19-G8) |
Radiator 40OC max, fans are driven by belt, with safety guard |
24V charge alternator |
Alternator: single bearing alternator IP23, insulation class H/H |
Absorber |
Dry type air filter, double fuel filter, oil filter, coolant filter |
Main line circuit breaker |
Standard control panel |
Two12V batteries, rack and cable |
Ripple flex exhaust pipe, exhaust siphon, flange, muffler |
User manual |
Engine Data
Manufacturer / Model | CCEC Cummins KTA19-G8, 4-cycle | ||||
Air Intake System | Turbo, Water/Air cooling | ||||
Fuel System | PT type fuel pump, EFC | ||||
Cylinder Arrangement | 6 in line | ||||
Displacement | 18.9 L | ||||
Bore and Stroke | 159*159(mm) | ||||
Compression Rate | 13.9 :1 | ||||
Rated RPM | 1500rpm | ||||
Max. Standby Power at Rated RPM | 575KW/782HP | ||||
Governor Type: | Electronic | ||||
Exhaust System | |||||
Exhaust Gas Flo | 1773L/s | ||||
Exhaust Temperature | 579℃ | ||||
Max Back Pressure | 10kPa | ||||
Air Intake System | |||||
Max Intake Restriction | 6.23kPa | ||||
Consumption | 635L/s | ||||
Air Flow | 10800L/s | ||||
Fuel System | |||||
100%(Standby Power) Loa | 205 g/Kw | ||||
75%( Standby Power) Load: | 205 g/Kw | ||||
50%( Standby Power) Loa | 211 g/Kw.h | ||||
100%(Standby Power) Loa | 132.2L/h | ||||
Oil System | |||||
Total Oil Capacity | 50L | ||||
Oil Consumption | ≤4g/kwh | ||||
Engine Oil Tank Capacity | 38L | ||||
Oil Pressure at Rated RPM | 345-483kPa | ||||
Cooling System | |||||
Total Coolant Capacity | 116.5L | ||||
Thermostat: | 82-93℃ | ||||
Max Water Temperature | 104℃ |
Alternator SpecifiCAT-parts-partsion
GENERAL DATA
Compliance with GB755, BS5000, VDE0530, NEMAMG1-22, IED34-1, CSA22.2 and AS1359 standards.
Alternator Data
Number of Phase: | 3 |
Connecting Type: | 3 Phase and 4 Wires, “Y” type connecting |
Number of Bearing: | 1 |
Power Factor: | 0.8 |
Protection Grade: | IP23 |
Altitude: | ≤1000m |
Exciter Type: | Brushless, self-exciting |
Insulation Class, Temperature Rise: | H/H |
Telephone Influence Factor (TIF): | <50 |
THF: | <2% |
Voltage Regulation, Steady State: | ≤±1% |
Alternator Capacity: | 625KVA |
Alternator Efficiencies: | 95.1% |
Air Cooling Flow: | 1.035m3/s |
Generating set data:
Voltage Regulation: | ≥±5% |
Voltage Regulation, Stead State: | ≤±1% |
Sudden Voltage Warp (100% Sudden Reduce): | ≤+25% |
Sudden Voltage Warp (Sudden Increase): | ≤-20% |
Voltage Stable Time (100% Sudden Reduce): | ≤6S |
Voltage Stable Time (Sudden Increase) | ≤6S |
Frequency Regulation, Stead State: | ≤5% |
Frequency Waving: | ≤0.5% |
Sudden Frequency Warp (100% Sudden Reduce): | ≤+12% |
Sudden Frequency Warp (Sudden Increase): | ≤-10% |
Frequency Recovery Time (100% Sudden Reduce): | ≤5S |
Frequency Recovery Time (Sudden Increase): | ≤5S |
Competitive Advantage:
High Performance of loading Easy start
Nice protection User-friendly operation
Low running cost Environmental Long service life