ARJP11A-MASA-B-A-EMU2 Tab Down RJ-45 Magnetic Jack PCB Mounting
Standard With PoE
- 10/100Base-t 1x1 Port Rj45 ARJP11A-MASA-B-A-EMU2
- RJ-45 Magnetic Jack PCB Mounting Standard With PoE
- Through hole RJ45 modular jack
- Dimension : 13.84x21.59x16.26mm
- Files : PDF / Datasheet / 3D / IGS / Step /Stp
Description:
ARJP11A-MASA-B-A-EMU2 Tab Down RJ-45 Magnetic Jack PCB Mounting
Standard With PoE |
LINK-PP Part Number | LPJXXXNL |
Cross Part Number | ARJP11A-MASA-B-A-EMU2 |
Application-Lan | ETHERNET(NoN PoE) |
AutomDX | YES |
Bst Circuit | YES |
Configuration RX | T,C |
Configuration TX | T,C |
Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
Cores per Port | 4 |
Diodes | NO DIODES |
LED Option | YELLOW / GREEN |
Latch | TAB DOWN |
Number of Ports | 1X1 |
PCB | FR4 |
PCB Mount Angle | SIDE ENTRY |
PCB Retaining Post | T POST |
Package Height (Inches) | 0.545 |
Package Height (mm) | 13.84 |
Package Length (Inches) | 0.850 |
Package Length (mm) | 21.59 |
Package Width (Inches) | 0.640 |
Package Width (mm) | 16.26 |
Pin Type | THT SOLDER |
RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
Search | YES |
Shield EMI Tabs | WITHOUT |
Speed | 10/100 BASE-T |
Temperature | 0 TO + 70℃ |
Turns Ratio RX | 1CT:1CT |
Turns Ratio TX | 1CT:1CT |
1X1 RJ45 Magjack with/without leds, meeting IEEE 802.3ab
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Yellow - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
Applications:
Used for networking and communication equipments such as HUB, PC
card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem
Competitive Advantage:
2600 staff,
100% test
Flexible delivery time