Vehicle Loop Detector Parking Barrier Gate with high speed , CE ISO SGS Approval

Vehicle Loop Detector Parking Barrier Gate with high speed , CE ISO SGS Approval

Quick Detail:

Name: vehicle loop detector

1. Easy installation
2. Compatible with parking system
3. Single loop and double loop
4. Two relay out

The loop detectors must only be placed in dry rooms or control cabinets that are protected against

all types of moisture and wetness. A distance of at least 10 mm from other devices must be maintained

on each side. The ambient temperature must not exceed 65° C. The installation of the induction

loop is described in other operating instructions.

Applications:

The WSTV-410 vehicle loop detector is a double channel inductive loop detectors. The principle is based on a change in the inductance within the loop which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor. Ease of use thanks to automatic calibration when the operating voltage is applied.

Specifications

Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC

( See the label on the detector)

Voltage tolerance AC: +10% / -15%

Voltage tolerance DC: ±15%

Power Consumption: 4.5VA

Output relays: 240V/5A

Operating temperature: -20°C to +65°C

Storage temperature: -40°C to +85°C

Frequency range: 20 kHz to 170 kHz

Reaction time: 100ms

Signal holding time: Unlimited

Sensitivity: Adjustable in 3 increments

Loop inductance: Total loop plus connection wiring: 50μH to 1000μH.

Ideal is 100μH to 300μH

Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter

Size of Housing: 78x40x108 mm (L x W x H)