High End Servo Motor Vehicle Barrier Gate Auto Parking System Drop Arm Barrier
Brand Name:WONSUN
Certification:CE, ISO, SGS
Model Number:DZ-140
Minimum Order Quantity:1PC
Delivery Time:3-7 working days after received your payment
Payment Terms:T/T,Western Union,Money Gram, Trade Assurance,Paypal etc.,
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Auto Parking System High-End Servo Motor Vehicle Barrier Gate
WONSUN is leading brand in China for vehicle barrier gate system
with good spare part, repairing and waranty support. Barrier gate
can be integrated with car parking access control system or car
park ticketing system. Boom barrier arm will be lifted up to grant
access upon verification from control system. WONSUN car boom gate
is compatible to most vehicle card access control and automated
parking ticket system in China. WONSUN barrier gate design is
optimized to offer reliable yet affordable solution for residential
condominium, apartment, commercial building and industrial factory
usage.
Parameters:
| Name | Barrier Gate | Application | Parking System |
| Speed | 0.3s,0.6s,0.9s,3s,4s | Max Boom Length | 6m |
| Power Supply | AC220V/AC110V | Rated Power | 50W |
| Motor Rotational Speed | 1400rpm | Protection Degree | IP64 |
| Working Temperature | -40℃~85℃ | Humidity | ≤90% |
| Remote Control Distance | ≤100m | Feature | no clutch |
| Net Weight(complete) | 42.6KG | Net Weight(machine core) | 22.1KG |
| Certificate | CE | Boom Type | Round boom |
Functions & Features:
1.When Power off,gate automatically open,no clutch design,no human
intervention.When power on,gate automatically reset,restore to the
gate closing state,truly unattended,fire safety standards.If
special requirement,manual operation is required when power
off.Operating arm
open and close by hand also can be realized by setting up control
board DIP switch,which ensure that the system can be used at
anytime.
2.The use of Single Balance Spring device,good regulation,no
noise,indefatigable,not easy to break,safe and reliable.
3.Avariety of input and output modes can be selected,normally open
normally closed optional.
4.Arm opening angle can be adjusted from 60 to 90 degrees,10
degrees resolution,suitable for eaves prominent place to install
Warranty:
1. Drive Motor is warranted against manufacturer’s defect for
lifetime
2. Standard warranty for all components is valid for12 months from
the date of delivery
3. This warranty does not include damages caused by:
a. Wear and Tear
b. Theft
c. Accidents
d. Act of God & Natural Disaster
e. Unstable power supply (i.e. inconsistent voltage or lightning)
FAQ:
1. When barrier finish closing, why does the arm open itself
slowly?
the spring is too tight, you need release the spring a little, then
test it again.
see whether the main crank touch the triangle tightly or not, if
tightly, adjust it.
reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal
noises?
As for this, it means the resistance on controller board is broken,
if you have professional tools to check,
then replace that broken resistance, if not, replace that
controller panel.
3. Why does the barrier finish half operation of opening and
closing?
If uses our controller panel, you only need to find resistance R37
on controller panel, and repalce it is ok.
4. When barrier closed, why is there a 5 degree angle of
inclination?
the model is not good, and the gear doesn't fit each other tightly.
the barrier didn't adjust well, need to reset.
5. When barrier finish open, but it closes itself without any order
control, what's the problem?
To check the loop cable first, because the loop cable maybe brokem
To check the motor sensor, if it is not set well, then reset it in
the middle between two holes on sensor rod.
6. Why does the arm wave a lot when opening and closing?
The spring is very tight
The Screw touches the rubber absorption tightly, need to reset
again.
7. Rubber linning installation suggestion:
It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
The place with many vehicles come and go, like shopping center,
carpark area.
8. Can you accept OEM/ODM order?
Absolutely, we are manufacturer of barrier gate, with 7 years
researching and developing experience.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
High End Servo Motor Vehicle Barrier Gate Auto Parking System Drop Arm Barrier
Inquiry Cart
0