Product Details
Managed 1000Base-Fx Fiber Optic Switches 2-Port Giga RJ45 Slot
Product Overview
24+2 Management gigabit fibre network switches is a second, four
gigabit managed switch, provides 24 SFP optical ports and 2 RJ45
ports. Support the second floor of wire-speed switching hardware.
You can form through the Ethernet port on the switch to WEB to set
various functions. Built-in ARP and DOS defense system, effective
defense ARP, DOS and a variety of variants of viruses, in addition
this switchalso equipped with many powerful features: a
comprehensive QoS, Spanning Tree, a variety of storm suppression,
Bandwidth Control, IGMP Snooping , ACL Access Control, DHCP
Snooping and so on. Very suitable for small and medium enterprises,
campus networks and metropolitan area network aggregation
applications.
• Product Key Features
- ARP Defense:MAC address and MAC address port security binding function and
filtering function can be an effective defense ARP attack; DHCP
Snooping can obtain the MAC address to the dynamic ARP protection
for users.
- QoS:Support multiple QOS policy, based on 802.1p priority settings for
each port provides 8 priority queues; IP-DSCP to IP header
according to different service level classification to achieve a
comprehensive QOS; AUTO VOIP function Set the port to the highest
priority voice signals, greatly improve the network IP telephony
voice quality.
- Spanning Tree:Support IEEE 802.1d, IEEE 802.1w (Rapid Spanning Tree Protocol) and
IEEE 802.1s (Multiple Spanning Tree Protocol) standard.
- AUTO DOS:Can the following seven different forms of DOS attacks for defense
- Land attack:an attacker to send with the same IP source address, IP destination
address of the forged TCP SYN packet of information flow, victims
of the system trying to send a response to his information, the
result is a system disturbance and will be paralyzed or restart
- Blat attacks: the attacker sends the same source port number and destination
port number of forged packets, the victim system attempted to send
a response to his information, the result is a system crash or
reboot.
- Smurf attack:an attacker use the target's camouflage the source address of a
broadcast address to the implementation of ping operation, then all
activities will be to target the host response, leading to network
congestion or disruption.
- Ping flood:using Ping broadcast storms, flooding the target system, so the
system can not respond to legitimate traffic.
- SYN / SYN-ACK flood:using SYN or SYN / ACK packets flood the target system.
- Protection Invalid TCP attacks: to prevent the TCP packet with invalid data caused by flood.
- Ping of Death attack:send out a very large ICMP request packets (a "Ping"), its
intention is to cause the target computer input buffer overflow, so
that the paralysis.
- Storm suppression:Can broadcast, multicast, DLF to set the flow.
- ACL Access Control:Used to control the port and out of the packet to ensure that
certain sites within the network will not be without access to
authorized users, while indirectly played a defense ARP attack
capabilities.
- IGMP Snooping: Support IGMP:Version 2 (RFC 2236): IGMP Snooping is used to overflow when the
multicast packet network, the establishment of a multicast group to
forward multicast packets to avoid the waste of bandwidth.
- Support 802.1x authentication, provide users with access to
certification.
- Wire-speed filtering - Storage - forward mode, providing true
non-blocking switching fabric.
- Support port mirroring, port trunking, port speed limit function.
- Support Port-based VLAN and based IEEE802.1Q the VLAN.
•Product technical specifications
Product Type | 24+2 Management gigabit fibre network switches |
Support agreement | IEEE802.3, IEEE802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE802.1q,
IEEE802.1p, IEEE802.1z, IEEE802.1d, IEEE802.1s, IEEE802.1w,
IEEE802.1ax, IEEE802.1ak |
Maximum Fram elength | 9216B |
Ports | 24 SFP optical ports and 2 RJ45 ports |
Network Media | 1000Base-LX: using long wavelength laser (1310nm) over multimode
and single mode fiber, multimode fiber the maximum distance is
550m, single mode 10-24km. |
1000Base-SX: 62.5μm multimode fiber the maximum transmission
distance of 275m, 50μm multimode fiber using the maximum
transmission distance of 550 meters. |
10Base-T: 3 classes or more than 3 kinds UTP; (maximum transmission
distance of 200m), 14880P / S |
100Base-TX: 5 Category UTP; (maximum transmission distance of
100m), 148800P / S |
1000Base-T: CAT-5E UTP or Category 6 UTP; (maximum transmission
distance of 100m), 1488000P / S |
VLAN Address Table | 4K |
MAC address table | 8K |
Cache | 32Mbits |
Backplane bandwidth | 52Gbit |
Filtering and forwarding rate | 10Mbps:14880pps |
100Mbps:148800pps |
1000Mbps:1488000pps |
Dimensions | 440x230x44mm(1U19-inch standard chassis) |
Use of the environment | Operating Temperature: 0℃~40℃; Humidity 10% ~ 90% non-condensing |
Storage temperature: -20℃~70℃ ; Storage Humidity 5% ~ 90%
non-condensing |
Power | Input :90-264VAC , 50-60HZ; output: 5V/12A |
Power consumption | Power consumption: 60W |
Ordering information:
P/N | Description |
FR-SW24GF2GTM-SFP | 24-Port 1000Base-Fx Managed Fiber Switch with 2-Port Giga RJ45 Slot |
Company Profile
FiberRoad founded in 2005, is committed to developing and manufacturing and
selling network communication products. In particular, the focus on
fiber optical technologies, Ethernet technologies and the
integration of broadband access technologies. With leading-edge
technology and high quality service as the driving force, FiberRoad continued steady growth, and become a top global equipment
supplier of innovative last-mile access in the telecommunications
market.
Products and Market
FiberRoad products include a broad line of FTTH,Fiber Media Conversion
platform, Manageable media converters, Fiber Switch, SFP
transceivers, components and subsystems,. CWDM/DWDM system ,
Passive products, In addition, we supply analogous products to
telecom fixed wavelength, data communications and cable TV markets.
As our professional engineering team have devoted ourselves to the
R&D for a long time, so that the products have been quiet
mature. We have received much popular recognition from our current
Telecom operators, Telecom engineering contractors, and Solution
Partners in the world. This alliance covers Europe, Asia, the
Middle East, Africa, plus North and South America. This global
partnership receives direct engineering and technical support from
our company headquarters in Shenzhen.
As services such as voice and multimedia are moving to IP based
technologies, carriers have found that their core networks can be
operated more effectively and economically if the public switching
networks are migrated to a next generation IP based networks. This
proactive thinking will allow FiberRoad to continue developing IP Camera solutions for today and
tomorrow's markets.