AC 3 Phase ls Thermal Overload Relay , 100A 125A Contactor Relay

Brand Name:KRIPAL
Certification:CE
Model Number:UKH-100
Minimum Order Quantity:500 pcs
Delivery Time:20 days and depends on ordering quantity
Payment Terms:T/T, L/C
Contact Now

Add to Cart

Active Member
Address: Daqiao Industrial Zone, Baixiang Town,Yueqing 325603,Zhejiang, China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

AC 3 Phase ls Thermal Overload Relay , 100A 125A Contactor Relay


Thermal overload relays are protective devices. They are designed to cut power if the motor draws too much current for an extended period of time. To accomplish this, thermal overload relays contain a normally closed

(NC) relay. When excessive current flows through the motor circuit, the relay opens due to increased motor

temperature, relay temperature, or sensed overload current, depending on the relay type.


These overload relays are similar to circuit breakers in construction and use, but most circuit breakers differ in

that they interrupt the circuit if overload occurs even for an instant. Thermal overload relays are conversely

designed to measure a motor's heating profile; therefore, overload must occur for an extended period before

the circuit is interrupted.


Applications:


UKH series thermal overload relay can be used in the circuit of 50Hz or 60Hz, rated insulation voltage 660V,

rated current 0.1-93A for protecting the phase break when the electric motor is overload. The relay has different mechanism and temperature compensation& can be plunged in UKC1 series AC contactor.


Specifications:


Motion Characteristic: Three-phase Balance Motion Time

No

Times of the setting current

Motion time

Start condition

Ambient temperature

1

1.05

>2h

Cold state

20±5oC

2

1.2

<2h

Heat state(Following the No.1 test)

3

1.5

<4min

4

7.2

10A

2s< Tp≤10s

≤63A

Cold state

10

4s< Tp≤10s

>63A



Phase-losing Motion Characteristic

No

Times of the setting current

Motion time

Start condition

Ambient temperature

Any two phases

Another phase

1

1.0

0.9

>2h

Cold state

20±5oC

2

1.15

0

<2h

Heat state(Following the No.1 test)


Working condition:


1. The installation altitude less than 2000m

2. The surrounding temperature range: from -5°C ~ +40°C

3. In the non-explosive condition. or without adequate erosion and destruction of gas and dust conductive area .

4. Without rain and snow invade

5. Pollution level 2


Remark:

We have two kinds of thermal overload relay: A. Old type - orange adjustable bottom;

B. New type - blue adjustable butom


China AC 3 Phase ls Thermal Overload Relay , 100A 125A Contactor Relay supplier

AC 3 Phase ls Thermal Overload Relay , 100A 125A Contactor Relay

Inquiry Cart 0