

Add to Cart
Black Automatic Swimming Pool Control System For Testing PH And ORP
Description:
1) the perfect match for your pool with its liquid crystal display
2) its ability to integrate all types of pool maintenance functions.
3) Our control is easily programmed for daily, monthly or seasonal requirements.
4) its smart thermo-plastic housing is suitable for fresh or salt water
5) can be installed away from your pool area. it's also has battery backup.
Ideal for pools: 1. Hotels 2. Motels 3. Clubs 4. Condos 5. Apartments 6. Homes
Recommend options
1. Controller
Connect controller to timer in parallel with main pump make sure to follow electrical codes
2. Sensors
Install ORP and pH sensors on recirculation line after filter or by pass line
3.Chemical Feeders
Connect chemical feeders to controller outputs. For chlorine or bromine erosion feeder,
install solenoid valve on intake line. Compatible with most ozonator and chlorine salt generators.
3. Technical characteristic
OPR Control | Adjustable from 0 to 999mv |
ph Control | Adjustable from 1.0 to 14 |
ORP Sensor | Platinum electrode with 13-ft(4m) cable |
ph Sensor | Glass electrode with 13-ft(4m) cable |
Readouts | ORP(3 digits) and ph(2 digits) LEDs |
Feed modes | Manual, automatic |
Adjustments | Setpoint, calibration, limits, feed rate |
Indicators | LEDs for feed mode, feed status, alarms |
Safety | Audio,visual and remote alarms out-of rang limits and overfeed safety timers |
Cabinet | Polystyrene 22x18x10cm |
Electrical | AC 220V/50hz |
Plumbing | PVC tees for 0.5in,1.5in or 2in line |
Warranty | 1 year on electronic module |
Shipping | 40x35x15cm carton 7kgs without pumps |