

Add to Cart
IEC60529 IPX Waterproof Tester IPX3/IPX4 Rain Oscillation Tube Tester
Product information:
Oscillating tube tester is designed and manufactured in accordance
with the standard requirement of IEC60529 IPX3 and IPX4. It is used
for the waterproof test of the electrical equipment.
The oscillating tube part of this device is controlled by
adjustable-speed motor and crank-link mechanism. This device is
reciprocating swing from the place of ±60°to another one of
±175°with the speed required by the standard through machine
adjusting angle.
The angle adjustment is accurate. The structure is stable and
durable. It is equipped with rotating stage through which the
rotating of 90°can be achieved. It is also equipped with clean
water filtration unit to prevent the pinhole from jamming.
Technical parameters:
No. | Item | parameters |
1 | Power supply | Single phase AC220V,50Hz |
2 | Water supply | Water flow rate>10L/min±5% clean water without inclusion. |
3 | The size of the oscillating tube | R200 ,R400,R600,R800,R1000,R1200,R1400,R1600mm Optional,stainless steel |
4 | Water hole | Φ0.4mm |
5 | Included angle of two holes | IPX3:120°; IPX4:180° |
6 | pendulum angle | IPX3:120°(±60°); IPX4:350°(±175°) |
7 | Raining speed | IPX3:4s/time(2×120°); |
8 | Water flow | 1-10L/min adjustable |
9 | Testing time | 0.01S~99 hours 59mins,can be preset |
10 | The diameter of rotary plate | Φ600mm |
11 | Speed of rotary plate | 1r/min,90°place limited |
12 | Load bearing of rotary plate | ≤150㎏electrical equipment (without rotary column); |
13 | Pressure gauge | 0~0.25MPa |
14 | Site requirements | Dedicated IP waterproof test room,The ground should be flat with
illumination |
15 | The area | According to the oscillating tube chose |