PVC Rolling Shutter Door Cleanroom Air Shower Micro-electronics PLC Control System

PVC Rolling Shutter Door Cleanroom Air Shower Micro-electronics PLC Control System

Quickly detail:

External Size: 1300x3000x2300mm

Internal size : 1000x2930x2100mm

Three person with three side blowing

HEPA filter efficiency: 99.999%@0.3um

Vertical laminar flow ceiling
Ionization
Automatic doors
Stainless steel construction

Introduction:

Designed with the dimension of 1300×3000×2300mm, the double person air shower room is actually
composed by two single person products. The double person product and the single person product have
no difference in function except for the applicable number of people and the volume. The material for
interior and exterior body of the product is SUS304 stainless steel. The body of the product is equipped
with multiple filters for getting excellent filtration effect. Users can also choose the product with high
efficiency particulate air filter (HEPA filter). There are total 24 nozzles with the mouth diameter of 30mm
set on the two sides of the product. These nozzles can achieve air shower for two to four persons simultaneously.

operating features :

Parameter :

Electrical & Power Requirements:

- All electrical components UL Approved. 230V or 460V, 3 Ph.
- Junction box on top for customer power supply.
- Control circuitry 12V DC & 24V AC

Motor/Blower Assembly:

- High efficiency motors to reduce electrical load.

- Motors thermally protected & self-lubricating.
- Motors/Blowers are selected to maintain constant required airflow rate up to twice the initial static pressure.
Filter/Blower housing has simple plug-in connector.

Lighting -Recessed 2 pin fluorescent lighting. 60 ft. candles.

Construction - Standard construction is Woodboard with plastic laminate exterior.

Epoxy Painted Steel, 304 or 316L Stainless Steel units are also available.
- Motor/blower compartment has hinged access panels.
- Return air plenums are painted.
- Door interlocks operate on magnetic system.
- HEPA filter mounted on exit side of shower in top section.
- 360 degree adjustable air nozzles.
- Anodized aluminum doors with clear acrylic windows.
- 0-999 second adjustable operation pre-set to 30 seconds. airshower tunnel

Electrical & Power Requirements

- All electrical components UL Approved. 230V or 460V, 3 Ph.
- Junction box on top for customer power supply.
- Control circuitry 12V DC & 24V AC

Motor/Blower Assembly

- High efficiency motors to reduce electrical load.

- Motors thermally protected & self-lubricating.
- Motors/Blowers are selected to maintain constant required airflow rate up to twice the initial static pressure.
Filter/Blower housing has simple plug-in connector.

Lighting -Recessed 2 pin fluorescent lighting. 60 ft. candles.

Controls:

- Shower operation controlled by solid sate LCD timer, with tamper-proof closure to ensure selected setting is maintained.
- Emergency "off" button with audible alarm installed inside shower. Built-in relays from motors, locks and timers.
Sequential operation initiated by sensor & door magnetic switch.

Optional Accessor

Factory test:

All of equipment is individually factory tested for safety and performance in accordance with international Standards. Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.

Factory test include:

--functional test and visual inspection

--electrical safety tests

--air velocity testing

--purification rank test (if need)

Warranty:

Our equipment is warranty for 1 year excluding consumable parts and accessories.

All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.

Additional IO/OQ/GMP document is available upon request.

Contact our sales representative for specific warranty details or document request.

Consumable parts illustration:

1: Pre-filter: each one should be replacement in each 6 month, but it can refresh no more three times.

2: HEPA filter: each one should be replacement in each half and one years.

Keling Purification Technology Co., Ltd engaged in air purification field for many years, that is

Professional manufactory with research and development, produce, sales of air purification equipment and HVAC air filter.

our product concern the follow range:

1: Clean room equipment: clean room Air shower, Pass box,Duct HEPA filter box Dynamical pass thru, Laminar flow bench, fan filter unit, DOP air HEPA unit, Dispensing booth, sampling booth, laminar flow booth , soft wall clean room , air cleaner , laminar flow ceiling unit. Laminar flow wardrobe .

2: HVAC air filter: ULPA air filter, Mini-pleats HEPA filter, HEPA filter with clapboard filter, high

temperature-resistance filter, pocket air filter, V-cell air filter, pre-filter, active carbon air filter,

v-bank air filter with big air volume, bag air filter, panel air filter, z-line air filter and Grease filter.

3: Hard wall clean room project, such as design, construct and monitor service and raw material supply.

Our product service for biological, food, chemical, medicine, electronic, micro-electronics,

skin care, precise instrument industry and Aero-Space, laboratory, scientific, national defense area

and so on , Our product have good reputation in worldwide ,our client spread all over European

and Southeast Asia.

We have excellent technical team pursue the high quality to exist, insisted concept of credit for in sustainable development

We sincerely hope establish steady and friendly business relationship with you.

You will achieve what are you want!

Trust me! I will be your finally choose !