Full Welded 304 Ss Clean Room Pass Through Box With Mechanical Interlocker

Full Welded 304 Ss Clean Room Pass Through Box With Mechanical Interlocker


Quick Detai For Cleanroom pass box :
External Size: 700x600x690mm
internal size :600x600x600mm
Interlocker : Mechanical or electronic
Material: inside is SUS304/201. Outside is steel with power coated
Material thickness : 1mm/1.2mm
UV Light : 1 pcs
Power: 220V/50HZ


Introduction:
The stainless steel clean room pass box adopts the SUS304 stainless steel as the material for interior and exterior product body and the two doors. The thickness of the stainless steel is 1.0/1.2 mm. Meanwhile, the product is equipped with the ultraviolet lamp with the power of 10W and the wavelength of 254nm. It can get the ideal sterilization effect. In addition, the embedded type installation of ultraviolet lamp can reduce the contact possibility of delivered articles and ultraviolet lamp tube to ensure safe use.


operating features :

1: C leanroom pass box is manufactured for the most demanding controlled environment applications.
2: All components are designed for maximum chemical resistance and enhanced durability for
a long service life.
3: It is constructed of stainless steel inside, making the work zone easy to clean and endurable.
4: Fool proof Mechanical and electric interlock are reliable, maintenance-free, maintains clean
room integrity by preventing both door from being opened and the same time.
5: Contamination-free transfer of materials in and out of the cleanroom
6: Cleanroom pass box should be eliminates unnecessary personnel entry
7: Full range of sizes meets any application
8: Stainless steel doors, latches and hinges extend service life—a must in a production environment!
10: Material options accommodate many application requirements, from chemical resistance to
static control to fire safety.
11: Fully-welded type 304 finish stainless steel construction
12: Smooth-ground crevice-free continuous seam welds throughout the interior and exterior
13: Service access via removable flush mount side panels secured by hex head stainless steel hardware


Technical Parameter:

Note :

Cleanroom pass box allow products to enter a cleanroom without human traffic that
increases particle loads and slows operations. Clean Air Products offers a broad range of
pass-thru cabinets, and our staff of experts will ensure you get the best product for your needs.


Consider the following options in making your selection:


Wall or Floor Mount?

Wall-mount models can be positioned at a comfortable standing height;
floor-mount models include a low-profile ramp to allow carts to be wheeled into the chamber.
Special mounting hardware is included for each model. Order support brackets for larger
wall-mount models (see illustration above). Your wall cutout should be .5" (13 mm) larger
than the overall height and width of your chamber.

Pass-Through Chamber Material?

Select among seven standard materials. Others (including
polycarbonate and dissipative polycarbonate) are also available.

Sliding Doors?

These easy-open doors eliminate clearance requirements.
Reinforced Doors—Plastic cabinets come with stainless steel reinforced door frames on a standard basis.

Other cleanroom pass box Through Options:

it is include a filter/blower module, shelves (with electropolished
stainless steel racks), illuminator, and grounding terminals.

Factory test:

All of equipment is individually factory tested for safety and performance in accordance with international Standards. Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Factory test include:
-- functional test and visual inspection
-- electrical safety tests
-- air velocity testing
-- purification rank test (if need)


Warranty:

Our equipment is warranty for 1 year excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.


Consumable parts illustration:

1: Pre-filter: each one should be replacement in each 6 month, but it can refresh no more three times.

2: HEPA filter: each one should be replacement in each half and one years.



Payment Term:

T/T in advance, 30% before place the order, 70% when you see copy BL
Or 30% T/T in advance before place the order, 70% LC at sight.

Keling Purification Technology Co., Ltd engaged in air purification field for many years, that is

Professional manufactory with research and development, produce, sales of air purification equipment and HVAC air filter.

our product concern the follow range:

1: Clean room equipment: clean room Air shower, Pass box,Duct HEPA filter box Dynamical pass thru, Laminar flow bench, fan filter unit, DOP air HEPA unit, Dispensing booth, sampling booth, laminar flow booth , soft wall clean room , air cleaner , laminar flow ceiling unit. Laminar flow wardrobe .

2: HVAC air filter: ULPA air filter, Mini-pleats HEPA filter, HEPA filter with clapboard filter, high

temperature-resistance filter, pocket air filter, V-cell air filter, pre-filter, active carbon air filter,

v-bank air filter with big air volume, bag air filter, panel air filter, z-line air filter and Grease filter.

3: Hard wall clean room project, such as design, construct and monitor service and raw material supply.

Our product service for biological, food, chemical, medicine, electronic, micro-electronics,

skin care, precise instrument industry and Aero-Space, laboratory, scientific, national defense area

and so on , Our product have good reputation in worldwide ,our client spread all over European

and Southeast Asia.

We have excellent technical team pursue the high quality to exist, insisted concept of credit for in sustainable development

We sincerely hope establish steady and friendly business relationship with you.

You will achieve what are you want!

Trust me! I will be your finally choose !