Inflatable FMX Landing Airbag Snowboard Landing Bag Mattress For Sport Game

Inflatable FMX Landing Airbag Snowboard Landing Bag Mattress For Sport Game

Top sheet is seamless and soomth instead of sewing. Landing Airbag is used for indoor and outdoor facilities, such as SNOWBOARD, SKI, SKATE, BMX, FMX, FREESTYLE ACTIVITIES etc. Olympic Size landing bag is available for Olympic Team training freestyle winter sports.
Landing Airbag has 2 chambers with multi-compartment air pockets inside. There are some air vents both sides for softness adjustments. Side bumpers is optional to keep jumpers away from sliding off the side. The material we used is the best brand in China named “PLATO” that is used widely in inflatable industry, it is water-proof, flame-retardant, UV-protected and Eco-friendly.

Inflatable FMX Landing Airbag for Safer Practice
King Inflatable Landing Airbag offers fall safe protection for beginners and pros, from dirt to snow. The Landing Airbag can be used for skiing & snowboarding on snow or on a dryslope in the summer, FMX or BMX, for year-round training. Our topsheet for FMX landing airbag is as tough as you can get.

Olympic Size Snowboard Landing Bag for Ski Resorts
King Inflatable is the first supplier of Sloped Snowboard Landing Bag in China. With this Olympic Size Landing Airbag, snowboard & ski riders can train any trick they want in a safe environment, no matter you are beginner or pro. It can be set up in the snow or for summer training with dryslope. Participants feel soft and safe when they land on the Freestyle Airbag with it’s unique air-chamber technology and multiple air vents for adjusting pressure.

Snowboard Landing Bag
No Bounce Inflatable Landing Ramp Airbag
Compare to other suppliers’ airbag, King Inflatable Landing Ramp is in a higher quality without any bounce when you land on it. With the unique multi air pocket techonoly, our Airbag Landing Ramp will certainly lower your risk when you do FMX or Snowboard training or show. If you are a rookie, the Inflatable Landing Pad is the best tool for your training, improve your tricks and keep you from the injury.

Safer Jump Snowboarding Airbag Training
Many horizontally setup airbags require riders to land to their back, but due to the King Inflatable alignment with the steep landing below the jump, our Snowboarding Airbag will allow skiers and snowboarders with the opportunity to effectively ride out of their trick, allowing them to learn new tricks safely before bringing them to snow.

Snowboarding Airbag
FMX Landing Mattress

Inflatable Airbag FMX Landing Mattress
With a King Inflatable FMX Landing Mattress for your practice you are able to learn new tricks safely before finally taking it to dirt. Everyone who has learned backflip, frontflip etc. on a motorbike knows it is one thing to do it in a foam-pit and a whole different world to do it to dirt. If do it in a foam pit, you may get stuck and wait in gas fumes till you get pulled out by a crane.

MTB Airbag Landing
The shape and size of the King Inflatable MTB Airbag Landing are fully customizable meaning it can be manufactured to cover virtually any landing surface, ramp, hill or contour. The Mountain Bike Airbag consists of 2 layers with adjustable air vents for adjustment of the firmness of both the upper and lower airbag chambers depending on athlete preferences and training targets.

Bike Landing Airbag
Inflatable Bike Landing Airbag is extremely safe, durable, highly transportable and will last much longer than foam. Mountain Bike Airbag Landing is designed with the latest absorption technology, which minimizes impact during a fall and eliminates the catapult effect. You can take it or use it ANYWHEREE, just move it around to different events or set it up in your backyard.

Specification :
1) Material: 0.55mm+0.9mm PVC tarpaulin.
2) Stitching: Double stitching & quadruple stitching.
3) Printing: digital print, silk print, or hand painting.
4) Blower: CE (220V, 50HZ) or UL (110V, 60HZ), plug can be customized.
5) Accessories: Repair kit (2pcs PVC tarpaulin material for each color ; 1pc glue).

About the inflatable stunts air bag:

1.Sizes:
This inflatable stunts air bag is for people who love to stunts,its size is 7*4*1.8m,it means 7m lenght,4m width and 1.8m height.

2.Workmanship:
This inflatable stunts air bag is sewing workmanship nees the blower inflate all the time.

3.Shipment:
This inflatable trampoline is very heavy so we suggest you choose shipping by sea,that will be better.

Note:
1. Top Sheet:0.9mm PVC tarpaulin,measurement,logo and the color are customized.Logo usually print on the top sheet.
2. Air pillars:Inflatable pillars is good to abord more impoact of the falling.
3. Slide flag:removable flag,when the slide flag was be damaged you can replace it.
4. Bottom Chamber:Separate top chamber with the ground,protect air bag and prevent people from touching ground.

Picture:

King Inflatable is a manufacturer with a trademark registration who has near 10 years of experience in the inflatable industry. We were founded in 2012 and have about 2000 square meters factory facility. Integrating the research, development, production, and sale, we have the best inflatable toy designers, skilled sewing workers, sealing workers, and uniquely innovative products. We insist on our enterprise core value of "Integrity-based, service-oriented, quality to win, achieve win-win".

Main inflatable in our production line for you, a wide range of choices, like Inflatable water park, Inflatable Bouncer, Inflatable Slide, Inflatable Tent, Advertising Inflatables, Inflatable Water Games, Inflatable Swimming Pool, Inflatable Obstacle, Inflatable Billboard, Inflatable Boats, Inflatable Combo, Inflatable Playland, Inflatable Shape, Inflatable Sky Dancer, Inflatable Sports, Inflatable Water Slide and so on.

Top-quality materials are always applied on our inflatables, all of them are made from the best material suppliers in China - Plato chemical; all of the material meets EN-71 EN14960, SGS, EN71 certification. All the product is inspected by water-proof,fire-resistance,cold-resistant, and pressure-resistance. Also, base on the perfect design, the raw material of our inflatables are cut out by the computerized automatic cutting system which can ensure the perfect shape of each products.

We have collected a team of top designers who are professional in using software like Rhino, Maya, Corel Draw, Keyshot, Photoshop, CAD,3Dmax, etc. We can design and produce any inflatable products to match your needs, your budget, your plan, or your place. All you have to do is catch an idea and we will do the rest for you! We will provide fast delivery, affordable prices, and perfect after-sales services for new and old customers.

	Company Summary
Establish Year:	2012
Location:	Guangzhou , China
Factory Size:	10000㎡ + 3000㎡
Employee Number:	100-200
Main Market :	Europe, North America, Middle-East, Australia, Southeast Asia, The products of King Inflatable have sold to more than 80 Countries and Regions all over the world
Main Products :	Inflatable water park, Inflatable tent, inflatable Slip N Slide, inflatable sport games, inflatable bouncer castle/slides, and advertising inflatables, there are more than 6000 different products from King Inflatable sold to all over the world
Annual Output Value:	USD 3800000.00
Main Machines:	Auto cutting machine:2pcs High-temperature welding machine: 10pcs High frequescy welding machine(25000w):2pcs Digital printing machine:1pc Japanese sewing machine: 25pcs Chinese sewing machine:35pcs Punching machine:2pcs