High Capacity Chemical Dehumidifier , Temperature And Humidity Controller

High Capacity Chemical Dehumidifier , Temperature and Humidity Controller

Quick Detail:

Temperature and Humidity Controller , Chemical Dehumidifier

Mainly used in laminated safety glass and glass manufacturing. For example: film room together, laminating room.

Plastic film laminated safety glass in transparent thin have a strong moisture absorption. Suck the moisture film, will emerge in the manufacturing process to produce steam bubbles. Confined to control the relative humidity in this very important process. Standard design conditions for this application are: at 25% relative humidity and comfortable temperatures.

1. High moisture removal.
2. Suitable for low temperature and RH process.
3. Could be usded together with air conditioner.
4. Start with domestic first rotor dehumidifier,
5. With 30 years professional theoretical and practical experience in dehumidifier field
6. Draw up the national military standard and industry standard of dehumidification equipment

Description:

Except the desiccant wheel, ZLB series low humidity dehumidifier also equipped with pre and after cooling coils. It process with and dehumidify normal temperature air, it is specialized dehumidifier for normal temperature and low humidity process environment. As follow are their major characteristics:

1. Main components: desiccant wheel, reactivation fan, reactivation heater, reactivation filter, , pre-cooling, post-cooling,heating coil,pre-filter ,medium filter and cabinet.
2. The cabinet is made of aluminum alloy, it is strong, compact, anti-corrosion, and it is anti-“cold bridge” which can help avoid condensation.
3. The cabinet is double insulation panel structure with high density polyurethane insulation material inside(The inner plate of HEPA select 304Stainless wire drawing board), it is insulation, anti-corrosion, sound proof, fire proof and strong.
4. The dehumidifier select PROFLUTE silica gel desiccant wheel from Sweden.
5. Select SHANGHAI GENERAL centrifugal fan, its impeller and vent was plated with anti-corrosion coating, it’s strong and anti-corrosion. Select three-phase asynchronous motor, imported bearing, and level IP55 protection and level F insulation.
6. Cooling coils select copper pipe and hydrophilic membrane corrugated aluminum fins, thickness of the copper pipe no less than 0.5 mm. Copper pipe thickness of heater no less than 0.75 mm, heating by vapor.
7. G4 pre- filter, F8 medium effect air filter and H13 high grade filter to assure the air purity.
8. Use control instrument,and humidity probe to control temperature and humidity. It is convenient to operate.
9. Functions of electric controller:Parameter setting, operating status displaying and controlling, historical datarecording, wheel stop switch alarm, temperature and humidity limit alarm, reprocessing temperature limit alarm, filter clogging alarm, multi protection for temperature limit and over current and unbalance of phase.It can add proportional control valve for reprocess heating and former and latter surface cooler. To improve dehumidifier efficiency by optimizing function of each components.
10. Main electrical components are Siemens, Siemens enjoy high high reputation for good quality, reliable operation.

Character:

1. Intake air filter, silica gel desiccant wheel, double cold-water heat exchanger;
2. Chain drive;
3. Electric heating by stainless steel tube, or by copper tube aluminum fin;
4. Efficient centrifugal fans, aluminum alloy frame, high pressure polyurethane and double foam layer cabinet, anti-cold bridge, electric multi-protection operation;
5. Reliable PLC control system.

Model Example:

ZLB-D-1000

ZLB: low humidity dehumidifier units basic code

D: Rotary regeneration type. D for Electricity, Z for Steam.

1000: Process airflow m3/h

Main Parameters of ZLB Series Dehumidifier:

Note:1. Air flow above 4000 without process fan, users can select.

2. If regeneration heating type select steam, P=0.4MPa.

3. Larger airflow dehumidifiers can be customized.

Competitive Advantage:

1. Peritek dehumidifiers are manufactured based on more than 30 years of research and development. Have been used in space suit specific cell production and become the most advanced satellite transmission tower supporting equipment.
2. Peritek dehumidifiers with R-DD optimal design, compared with the general dehumidifier, can save energy more than 35%, and above 10% with heat exchanger dehumidifiers.
3. Dehumidification ability of Peritek dehumidifiers is great. Under normal use, after closing down for 10 hours, system can restart and reach the technical target in 30 to 60 minutes.
4. We can provide users domestic initiative remote communication interface according to your requirements, and the remote computer operation and management system networking, superior to realize remote service.
5. Peritek dehumidifiers adopt steel structure with plastic-sprayed surface (Peritek self-owned patent, patent number: ZL 2008 0163177.3 2).

Typical Application Fields:

Output temperature is below 18 degree, dew point td is below -8 degree. Be used for mixing workshop, coating workshop, production workshop, assembling workshop, etc, enable environmental index of these workshops to achieve 20-24degree, RH below 20%.

1. Warehouse, Library and Archives:

2. Pharmaceutical Industry:

3. Electronics Industry, Lithium Battery

4. Chemical Fiber Industry:

5. Food Processing Industry:

6. Space and Aviation:

7. Glass Lamination

8. Ship Coating

9. Bridge Anticorrosion

10. Rubber Tire

11. Nuclear power plants

12. Printing

Work Principle:

Base on the state-owned enterprise, Zhejiang Paper-making Research Institution, Hangzhou Peritech Dehumidifying Equipment Co., Ltd is a high-tech enterprise, which specializes in R&D and manufacture desiccant rotor dehumidifiers and services air handling projects. With more than 30 years professional theoretical and practical experience in dehumidifier manufacture and projects. Peritek has users across the pharmacy, chemical fiber, food, glass, battery, shipping coating, nuclear power station, aerospace and military, etc.

Company's technical personnel accounts for 30% of the total number, and the main staffs of technology and production management have 10 to 30 years professional experience in dehumidifier field. We have ever been in charge of the sole dehumidifier development project approved by the nation and through the appraisal, have won the domestic sole dehumidifier development project provincial technological progress, and was awarded as national new product, besides, we have several dehumidifier national patents. We were responsible for large domestic and overseas projects, and achieve customers’ appreciate.

Depending on the in-depth knowledge of the air dehumidification and rich experience of the dehumidifier manufacture, we have excellent teams of design, install and after-sales. We could and always make special design according to the users’ requirements and undertake turnkey projects of lithium environment system, which includes the design of process parameters, the manufacturers of equipment and the construction of drying room and pipeline. By now, Peritek has developed series of dehumidifiers including: ZL Series Rotary dehumidifier, ZLB Series Low Humidity Dehumidifier Unit, ZHL Series Lithium Environment Dedicated Ultra-low Humidity Dehumidifier, ZLF Closed-cycle Rotor Dehumidifier, ZLLY Series Four Seasons Mobile Dehumidifier, ZHD Series Glove box Dedicated Dehumidifier and FDH Series Freezing Type dehumidifier, etc. After handling, the dew point of supply air could be≤-80℃, the relative humidity of the air at room≤1%,. In recent years, in order to meet the demand of green, environmental protection, energy-saving in the lithium electricity industry, we developed and put into operation RM and RM-D series NMP recycling machine series products.

The company has been rated as Hangzhou high technology enterprise and certified by ISO9001:2008.Our products registered the trademark “Peritek". Through the tireless

efforts of all the staff, the company achieved rapid development, and became one of the

most powerful domestic rotor dehumidifier manufacturers. Furthermore, we draw up the

sole national military standard and industry standard of dehumidification equipment as the

industry representative.

“Manufacture products professionally, explore market honestly”, Peritek dedicates to the research, development, production and sales of dehumidifier, trying to provide first-class products and high quality service for all kinds of industries.