TR 8 - 14 Double layer roll forming machine color sheet width 1250mm

Machine details

Technical parameters of double layer roll forming machine of type TR8-14:

Dimensions: 6500mm x 1300mm x 1500mm

Forming method: roller forming

Number of forming: upper 10 rows under 13 rows

Feed width: 1250mm

Thickness of rolled plate: 0.2-0.8mm

Equipment roller : Φ 70 mm

Hydraulic power: 4 KW

Rolling speed: 8-10m/min

Pump station motor: 4KW

Equipment frame: 300H steel

Shear knife material: Cr12 (chromium 12)

Equipment transmission: sprocket, chain

Automatic computer length control system

The TR8-14 double layer roll forming machine combines the two models very well, with reasonable structure and beautiful appearance.

With the characteristics of space saving and simple operation, it is especially suitable for small site and site construction.

The TR8-14 double layer roll forming machine is mainly composed of feeding and leading-in platform, forming host, shaping and cutting device, hydraulic station, computer control system and so on.

The operation of the upper and lower layers is simple. Only the conversion button on the electric control cabinet can be used to control each layer respectively. The power can also be used to control each layer separately through the clutch.

Optional equipment has ordinary feeding machine, hydraulic feeding machine.

The rotation mode of the double layer tile press of model 860/900 has high accuracy. The upper mold system and the lower mold system are respectively equipped with a set of worm gear and worm drive organization fixed on the scissor frame, which is driven by a pair of synchronous motors.

The upper and lower models are subject to customer requirements.

TR8-14 double layer roll forming machine adopt new double layer design, dual use, small occupation, convenient transportation, double layer cost much less than two single layer machine, is the user.

The after-sale service of our factory is perfect, and we can design and manufacture according to the user's requirement, and guide the user to manufacture, install, debug and maintain.

In order to get used to the two layers of the double material of the product, TR8-14 double layer roll forming machine has two layers of height.

The disposal of the end product behind the cutoff mold should be equipped with up and down adjustment, so as to get used to the outlet height of these two plates.

To satisfied in the limited area of the requirements of forming two section, can quickly change the commodity, tile press double mill (double layer roll forming machine, double integration equipment) has also been made, the double layer roll forming machine is change between high and low frame, produce a kind of summary color steel installed on the lower frame, produce another kind of plate type roll installed in high rack above, production line has a decoiler, a block press, if the color plate feeding lower roll, forming a plate type, such as material feeding top roller, and forming another section .

Our factory was founded in 1998. We have been engaged in the roll forming machine manufacturing industry over 25 years.

Main products are color steel roll forming machine, classical glazed tile forming machine, C/Z purlin roll forming machine, gutter machine, ridge cap machine, keel roll forming machine for light steel structure building, floor deck forming machine, sandwich panel production line, guardrail roll forming line; and various kinds full-automatic cold roll forming line such as cable trey production line, double C bugging rack beam production line; and other roofing machine line, like stone caoted roofing sheet prodction line.

And our factory has more than 15 years of export experience. we already sold to more than 100 countries and regions in the world. We have a deep understanding of the profiles used in each country and provide high-quality suggestions for subsequent customers' purchases.

In the production of machines, from parts processing and welding to assembly, we have strict quality control in every step. We must be responsible to every customer.
we were and continue always keep: "not only complete a machine, but also perfect every detail".

We have approved certification of CE, the concept “control every process and perfect all products” is curved in everyone’s mind. Each machine will be via testing before leaving factory, problem machines will never be delivered to customer.
We have more than 15 years experience of export and know very well about the different needs of customers from both in developing countries and developed countries, and provide a large number of customers with satisfactory design plan. Now our products have been exported to more than100 countries and regions of the world, and established a long-term cooperative relationship with clients. We do firmly believe a true partnership never ends with the delivery of the goods and satisfactory after-sales service can make a great difference.
We are willing to promote the economic and technical exchanges with the world, and do positive work to enhance the friendship between people from different countries. We sincerely hope: you and I hand in hand, create the glorious future altogether!

Choose Cangzhou Huachen Roll Forming Machinery Co.,Ltd is worth your trust.
We manufacture high standard roll forming machine for export for nearly 15 years.

Our machines have been exported to more than 100 countries and regions around the world.
Maintained good cooperative relations with customers.