Access European Union Markets with CE Marking

CE Marking is your ticket to EU market access. We have helped countless manufacturers understand and meet the requirements of relevant New Approach Directives for CE Marking. Put our advisory, testing, and certification services to work for you and allow us to guide you through every step of the CE Marking process:

1. Determine which directive(s) are applicable to your product
2. Fulfill the essential requirements
3. Establish a monitoring system
4. Establish an accident reporting system
5. Declaration of Conformity
6. Save the documentation for 10 years after a product has been placed on the market
7. Register with the appropriate governing body within Europe

Notified Body Status

Intertek has five European Union-based Notified Bodies located across Germany, Sweden, France, Spain and the United Kingdom. We have the product expertise and full capability to test to a variety of directives.

The EMC Directive 2004/108/EC sets the essential protection requirements for electrical and electronic equipment.

The EMC Directive limits electromagnetic emissions of equipment in order to ensure that, when used as intended, such equipment does not disturb radio and telecommunication as well as other equipment. The Directive also governs the immunity of such equipment to interference and seeks to ensure that this equipment is not disturbed by radio emissions when used as intended. In order to market your electrical device within the member states of the European Union, your product must comply with harmonized standards (such as EN 55022 and EN 55024 for Information Technology Equipment).

Global Network of EMC Testing Laboratories
With the largest global network of 23 EMC testing labs, Intertek provides the capacity, proximity and engineering resources to streamline your EMC compliance testing process for any market you want to reach. Once you have met all applicable requirements, it is your responsibility to show conformity with the EMC Directive by affixing the CE Mark to your device.

Services

• EMC Testing
• Electromagnetic Emissions Testing
• EMI Testing
• Calibration Services
• SEMI F47 Testing

EMC Accrediations

We hold a long list of EMC Accreditations from around the world. Our queue times are as fast at 3 days, 24-hour turnaround on quotes. We offer both open and fully sheltered sites, fully anechoic and semi-anechoic chambers, with site size ranging from 3 meters to 10 meters.

Save time and money by bundling EMC with other testing and certification needs (safety, environmental, energy efficiency, performance). With Intertek you will eliminate the headaches of using multiple labs, delays in logistics, and shipping costs.

As a Notified Body and Competent Body status in the EU and U.S. to the Radio and Telecommunications Terminal Equipment (R&TTE) Directive, Intertek can help you achieve global market access for your products.

We are a Notified Body and Competent Body for CE Mark to the R&TTE and EMC Directives and more. One essential requirement in the R&TTE Directive is effective utilization of the radio spectrum. This is usually demonstrated by conducting radio testing in accordance with harmonized ETSI standards. Some parameters in this radio testing include transmitter output power, frequency range, frequency accuracy, undesirable radiated and/or conducted emissions, adjacent channel power, and power density. We can test to all of these parameters and more to determine if your product is in compliance with the Directive and suitable for CE Marking.
Typical parameters in radio testing include:

• Output from the transmitter
• Frequency range
• Frequency accuracy
• Undesirable radiated and/or cable-borne emissions
• Neighboring channel effect
• Power density

Contact with us: Edison Xia, QQ:863253430, Skype:Lucky.dog12, Edison_xia(AT)126.com

About Us

Shenzhen LCS Testing Compliance Laboratory Ltd. is an independent third-party testing laboratory based in Shenzhen China. LCS Testing Laboratories have been progressing steadily and continuously built in compliance with ISO/IEC 17025:2005 and operated by GUIDE 25 and EN 45001 Quality Standard.

LCS Testing Laboratory is recognized by several internationally recognized Certification Bodies and Notified Bodies: the UL, FCC/TCB, CEC, Industry Canada, VCCI, TIMCO, SIEMIC, EMCC, PHOENIX TESTLAB, Intertek, NEMKO, DEKRA, TUV, SAA approval, ILAC-MRA&CNAS(NO.L4595), CMA, CBTL, NVLAP, etc

With a team of professional engineers and technologists, who have the expertise and global experiences in type examinations and safety assessments, LCS Testing Laboratory provides dedicated and precise security control services to electromechanical devices manufacturers all over the world, in order to minimize the industrial hazards upon people and the environment.

LCS unique expertise and specialized resources and abundant experience lead us to realize the enormous responsibilities and expanding. Nowadays, LCS Testing Laboratory is the leader in the market due to its comparatively technical advantages and efficient localized services.

LCS services:

Europe CE mark, GS mark, EMC, LVD, R&TTE, MD, ERP, RoHS/WEEE Directive, IES files

North America UL/cULus, cETLus, FCC, FDA, IC(Industry Canada), CEC, Energy Star, LM79/80

Australia and New Zealand SAA Approvals, A-TICK,C-TICK,RCM mark, EMC, MEPS

Japan MIC/TELEC, PSE, VCCI

Korea KC mark, KCC, CB, MEPS

Singapore SAFETY MARK

China CCC/CQC

Taiwan BSMI,SRRC

Middle East Saudi Arabic SASO, Kuwait TER/TIR, Iraq CoC/Voc, IEC/ISO 17025 Report

Dustproof and Waterproof IPXX testing(IP43,IP54,IP65,IP67,IP68...)

Contact with us: