Tapered Twelve Sided Pole Welding Line Clamped Tightly With Hydraulic Control And Chain

Tapered Twelve-sides Pole Welding Line Clamped Tightly With Hydraulic Control and Chain

Machine overview :
Automatic tapered twelve-sides light pole welding line for making light pole which used in Times Square .Ths type lighting pole shut and welding combination machine is suitable for round or octagon pole. Our multi-heads clamping system can ensure the productiond quality. It is suitable for pole diameter : 350/450/ 550mm and pole length max 12000mm.
As a specially in producing the pole clamping and welding machine. We have lots of experience in producing this machine.The pole was widely used in the city and road. It is suitable for one piece type polygonal and circle taper light pole. it is automatic welding line, the dolly with speed adjustable motor can pull (or push) the light pole from small end to big end , The hydraulic cylinder through mechanical chain, Worm wheel push the clamping wheel to close the pole and do welding at the same time.

The machine includes the following items :

• Long working table with rack for pull doly.
• Dolly for pulling pole
• Hydraulic clamping and welding unit (including 3 sets clamping wheels for
• polygonal and circle pole)
• Submerged Arc Welding and Gas-shielded welding(CO2) Welding system,
• including welding wire feeding system.
• The flux recovering system
• back support unit
• hydraulic system

Technical Parameters

Lincoln welding machine (USA BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable for Submerged Arc Welding
process

Fast motorized return back for dolly
Note:for the standard machine, the dolly return back can be motorized with working speed, it
is very slow for return back process. So, normally, the operator will open the dolly clutch and
push the dolly by manual.
In order to reduce the manpower, we have option: Fast motorized return back for dolly. The
operator only push button, the dolly will be back to the welding head.
See attached detail photos.

Both Side additional hydraulic cylinder
It is suitable for small diameter big thickness light pole, or steel plate with high tensile
strength light pole.
With this additional option , the diameter from 60~450mm, thickness 2.8~6mm, all pole can be
suitable. And easy for operation.

Applications:

Electricity pole and lamp pole was widely used in the countryside and City ,such as electricity transport pipe , shine lamp pole ; blinker , Offshore,Petro Chemical ; Plate Heat Exchanger ; Charged air cooler ; Pressure Vessel ;Pipe system&Steel works etc.


Competitive Advantage:

1. All the bolt using 12.9 grade Bolt , not using 8.4 grade. Making the machine more stronger.
2. 20 % overweight design , could making the rotator focus more.
3. Double row wheels ,not only making the wheels stable, but also artifacts to increase friction.
4. All the parts using well-known brands in China or other countries . Quality is more reliable .
5. Using double row bearings.
6. The base of rotator welded by plates, with high strength, no deformation after long time using.


Why choose my factory?

360°guarantee makes ordering risk free.
20 years welding machine manufacture experiences.
one-stop service of welding.
OEM service.
Quickly feedback for your problems.