Product Details
3000BPH Automatic Carbonated Beverage Filling Machine / Soft Drink
Soda Water Filling Line Glass Bottle Pulling Ring Cap
1.Rotary bottle washer
Principle:
This washer is developed on the basis of digesting and absorbing
advanced technology introducing from abroad and is with
international advanced level. It is mainly used for rising for 1st
hand PET or glass bottles.It is advanced in construction , steadily
in performance, safe in operation , easy in maintenance high in
production efficiency, and the speed can be regulated infinitively.
The rinser is the ideal choice for drink factories of small and
middle size. The bottles will be taken into rinser by conveyor, the
dia plate will turn each bottle to be caught by spring clamp, with
driven energy of motor, the spring clamps will go forward a circle
along main axis, the bottles will be reversed 180°,bottle mouths
will be facing to floor, and at the meantime, spray water value
will be open and clean pressure water will spray inside bottles,
with the water fall down, dirty inside bottles will be taken away.
Then the cleaned bottle will be turned 180°again and sent into next
machine station. The whole machine is made of SUS304. The spring
clamp is by Italian design, can be slightly adjustable according to
bottle neck size difference and can protect bottle neck. And water
spray system is from American, make sure water spray averagely.
Easy for clean and maintenance.
Parameters:
Rising heads: 12 pcs
Capacity: 0-3000BPH (each bottle rinsing time 4s)
Power: 0.92KW
Dimension: 1050*1050*1900mm
Weight: 450KG
Applicable bottle: D∮50-100mm,H 50-350mm
18 head isobaric filling part
This filler is developed on the basis of digesting and absorbing
advanced technology introducing from abroad and is with
international advanced level. It is mainly used for filling
gas-containing drink, such as aerated water, cola sparkling wine ,
fruit tea and so on .It is advanced in construction , steadily in
performance, safe in operation , easy in maintenance high in
production efficiency, and the speed can be regulated infinitively.
The filler is the ideal choice for drink factories of small and
middle size.
Production Capacity: | 0-4000b/h |
Bottle /standard: | Glass bottle , PET bottle , Pop-top can |
Applicable bottle: | D∮<92mm,H<310mm |
Filling Pressure: | 0.2-0.3Mpa |
Filling Temperature | 2-6 ℃ |
Power: | 3kw |
Overall Dimensions: | 1750*1750*2000mm |
Weight : | 1800kg |
Pulling Ring Capping part
General specifications:
The machine is sued for pull ring capping for glass bottles; The
machine is set with bottle dia-plate for automatic bottle entrance;
Workers put caps into cap loader, Oscillating coil will unscramble
and load bottle automatically, with help of compressed air, caps
will load correctly to capping head; By the main motor driven
energy, the capping tube move up and down to finish the capping
job; When one bottle capping finish, the spring in the capping tube
will flick off the done bottle and start for a new one; Comparing
with traditional capper, this one is using adjustable speed motor
to control speed, and transmission part develop to upgrade speed
also; The machine is produced with high quality SUS304, is with
reasonable construction, easy for bottle change, easy for
maintenance;
Construction and function:
1, Frame desk, to support;
2, Cap loader, to make disordered caps loading into cap loading
rail in order, and make sure cap mouth face to floor, inversed caps
will be eliminated;
3, Cap sealing system, to sealing automatically when cap loading on
bottle mouth;
4, Conveyor rail;
Capacity | 0-3000BPH |
Capping head | 3 |
Capping tube stroke | 58mm |
Applicable bottle | Glass bottle |
Applicable bottle cap | Pull ring cap |
Main motor power | 0.75KW |
cap sorter power | 0.3KW |
Suggested compressor | 0.6m3/min 0.7Mpa |
Dimension | 1000*750*2300mm |
Weight | 950kg |
Application:
Company Profile
ZhangJiaGang City FILL-PACK Machinery Co.,Ltd. which was originally
set up as an factory in 1999,the company is growing up time by time
in research and design, quality and production, sales and after
sale service. Our machineries are sold to more than 50 countries in
the world and over cross domestic.

We specialize in producing beverage filling-packing equipments and
water treatment equipments. The quality already pass drinkable
standard.At present we produce: production lines for mineral water,
pure water, fruit juice,tea drink,milk drink and carbonated drink
with capacity 1000-20000bottles/hour; production lines for vinegar,
soy sauce and wine 1000-20000bottles/hour; 3-5 gallon barreled
water with capacity 60-1200 barrels per hour and water treatment
plants 1-30 ton/hour; We provide separate machinery or turnkey
project.
Our products pass quality inspection executed by Bureau of Quality
and Technical Supervision every year. We pass Italy CE inspection
in 2011;

We have full-time development and design engineer team, we absorb
technologies from Germany, Japan, France, Italy, Switzerland,
combined with China's national conditions to develop high starting
point and advanced technology filling equipments, degree of
automation to achieve the advanced level.

We own 3700 square meters modern factory in accordance with
ISO9001: 2000 certification system standards with all kinds of
advanced processing equipment and testing equipment, experienced
technicians, scientific and strict management, all constitute
FILLPACK excellence in product manufacturing system, which provides
the strongest protection for FILLPACK product quality.

We believe in FILLPACK’ s future while you choose us!