

Add to Cart
Intelligent electronic limit switch remote gate motor door opener sliding gate operator automatic
Main Features
1, Ultra-low power consumption in standby mode. Average power
consumption is less than 0.05W, longer service life of the battery.
2, Electronic limit switch, never miss the limit switch position.
Power failure or manual release would not affect the OPEN/CLOSE
position any more.
3, Remote control learning more intelligent. Remote controls can be
learned without disassembling the motor, bring more convenience to
users.
4, Integrated structure of motor and battery makes installation
more convenient. Built-in large capacity battery exempts your extra
worries about power failure.
5, Intelligent Soft Start-Slow Stop function makes gate running
more smoothly, extend its service life. Speed and distance are
adjustable according to the installation.
6, Intelligent Human-Machine interaction, indicator light feeds
back the error information timely makes installation and testing
easier.
7, Obstruction protection, anti-clip function when hitting the
obstacles protects life and property safety better.
8, Battery low power protection. Auto-stop when battery power is
low to avoid damaging the battery due to excessive discharge.
9, Infrared protection, device can be optional connected to ensure
the passing safety.
10, Auto-Close function can be set on demand.
Electronic Data
Model | KMP202 |
Soft start | YES |
Stop on obstacle (sensitivity adjustable) | YES |
Auto warming-up (at freezing temperature) | YES |
Remote control | 418MHz (50m, approx) |
Wire control | Available |
Auto closing | YES |
Vehicle loop detector socket | YES |
Photocell socket | YES |
Alarm light socket | YES |
Troubleshooting
1. The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.
2. The power indicator light doesn't flash and the key doesn't
react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.
3. The opening and closing limit can not work.
A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the
position of the limit iron.