Full-automatic Rail 6 temp Zones Lead-free Reflow Oven 2200*350mm PC Control Heating Machine

Full automatic rail reflow oven + PC control 6 temperature zones (up6+down6)

Lead-free SMT Reflow Oven PC6635 (width 350mm) 2200*350mm heating machine

PC6635 catalog download:

PC6635 reflow oven - Instruction.pdf

SMT Production Line Recommendations: (total lenth 11.5m)

1.PCB loader

2.E6 solder paste printer

3.PCB conveyor

4.CHM551 pick and place machine

5.PCB conveyor

6.PC6635 reflow oven with automatic rail+PC

7.PCB unloader

8.Offline AOI VT680

Technical Paramater for PC6635

Description for PC6635:

1.Patented heating wire technology with independent circulating air structure, top and bottom heating methods, high thermal efficiency, and rapid temperature rise, reaching the set working temperature from room temperature in approximately 20 minutes, with a temperature difference of less than 30°C between the set temperature and actual temperature in the welding area.

2.Equipped with a dedicated high-temperature motor from Taiwan San Yue, directly coupled to drive hot air heating, ensuring balanced hot air distribution, low noise, and minimal vibration, allowing 0201 components to remain in place during transportation.

3.Unique air duct design with imported snail shell air circulation and three-layer air distribution devices, providing uniform air circulation, large heat capacity, and separate heating for the preheating zone, temperature control zone, and welding zone with independent circulation and temperature control, each temperature zone controlled with an accuracy of ±1°C, and the furnace chamber is opened with a pneumatic top cover.

4.Standard configuration includes two forced cooling zones, with the cooling air temperature reaching as low as 5°C, and the cooling rate in the first cooling zone can reach -5°C/S. Effectively meets the requirements of various lead-free processes.

5.Suitable for adjusting the temperature curves of various models, with dual or triple welding zone configurations, eight-line PROFILE TEST with a minimum of 8°C, and continuous curve testing specifically tailored to lead-free soldering processes in Japan or Europe and America.

6.The latest design of dedicated transport guide rails, made of high-temperature resistant and wear-resistant aluminum alloy, ensuring high rigidity and no deformation.

7.The transport system uses variable frequency speed control, driven by imported Japanese Dongchuan motors, with high-quality stainless steel chains and SUS316 material stainless steel mesh belts for synchronized transport, further ensuring stable transport. It is also equipped with an uninterruptible power supply (UPS) function, effectively preventing damage to PCBs inside the furnace due to sudden power outages.

8.Controlled by an industrial computer, with a LCD monitor display and Windows 10 operating system, featuring flexible curve testing and powerful dynamic curve analysis capabilities, as well as the ability to print and save all data, meeting the requirements of lead-free processes.

All electrical components are made of imported parts, and all signal lines are shielded to ensure stable and reliable operation of the SMT24 for 24 hours a day, with a one-year warranty on the entire machine and lifetime maintenance.

100% Real Pictures of PC6635:

With computer control:

Full-automatic rail conveyor +mesh:

Reliable factory supply:

Warranty:

The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct supply.
We provide online Q/A and troubleshooting support and technical advice service.

Provide one to one after-sale service. Each machine 100% tested well before ship out.
Tech support:
Kimi Mob: 0086 135 106 75756
Skype: kimiliu89
E-mail: kimi@charmhigh-tech.com

Welcome to follow us in YouTube: https://www.youtube.com/@KimiLiuCharmhigh/videos

If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.

CHARMHIGH TECHNOLOGY LIMITED is a professional SMT pick and place machine and SMT production line equipment maker which founded in 2009. The company is located in the Hunan province Changsha High-tech Development Zone, covering a total area of 3600 square meters. As a professional modern science and technology enterprise capable of both R&D, production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
We start up business from CNC router since 2009, our engineers had plenty experiences on machinery and motion control system, so we added SMT technology into our business since 2012.

Now our 2 heads and 4 heads desktop SMT pick and place machines are for the majority of small and medium SMT manufacturing research & developments organization, LED Lights, Driver Cards or any Similar Types of Manufacturing Facilities. Our 6 heads, 8 heads and 12 heads vertical standard high speed SMT machine is for big volume production factories. We provide one-stop SMT solution to different customers.

By now, the products of our company have been sold to many countries, such as the United States, Canada, United Kingdom, Italy, Germany, Spain, Poland, Australia, Russia etc.

We are very keen to stay up to study with the latest SMT technology, we have confidence to create more quality products. We take after-sales service as the most important thing, please don't hesitate to contact with us if you have any questions or new ideas.

Charmhigh new building

Charmhigh Office

Charmhigh warehouse

Charmhigh customers