Steel Palisade Fencing Panels
The forbidding appearance and inherent strength of the pales
provide an effective deterrent to would be intruders. It is
available in a choice of head styles, both in the traditional 'D'
pale profile, and 'W' section pale for added security.
Palisade is offered in a range of heights up to 3.6 metres, and is
self-adjusting to slopes of up to 1 in 3. It can be supplied
assembled in panels, or bundled for site assembly along with either
bolts or rivets. Palisade is available in a range of finishes,
galvanised in, or galvanised and colour coated in various colours
to blend with the environment.
A fish plate passes through a slot in the post and secures the horizontal rail
captive in its position. The pales are connected to the horizontals
to form the panel and are held securely together by utilising
vandal resistant security fasteners.
Fencing is supplied in 2.75m wide standard panels for easy assembly
on site. Special panels and posts to step or rake can be supplied
if required. Non standard posts for cranking over walls, or base
plated for fixing to concrete are also available.
1.Steel Palisade - Specifications
we offer a range of standard specifications as listed below that
should fulfill the needs of most sites, but these can be altered to
become site specific as required.
Height | Post Dimensions | Rail Dimensions | Support Legs | Corrugated Steel Palisades |
1.2m | 102x44 or 100x55 | 40x40x6mm | 1 | W - 2.0mm or D - 3.0mm |
1.5m | 102x44 or 100x55 | 40x40x6mm | 1 | W - 2.0mm or D - 3.0mm |
1.8m | 102x44 or 100x55 | 40x40x6mm | 1 | W - 2.0mm or D - 3.0mm |
2.0m | 102x44 or 100x55 | 45x45x6mm | 1 | W - 2.0mm or D - 3.0mm |
2.1m | 102x44 or 100x55 | 45x45x6mm | 1 | W - 2.0mm or D - 3.0mm |
2.4m | 102x44 or 100x55 | 45x45x6mm | 1 | W - 2.0mm or D - 3.0mm |
2.7m | 102x44 or 100x55 | 50x50x6mm | 1 | W - 2.0mm or D - 3.0mm |
3.0m | 127x76 | 50x50x6mm | 2 | W - 2.5mm or D - 3.5mm |
3.6m | 127x76 | 50x50x6mm | 2 | W - 2.5mm or D - 3.5mm |
2. Palisade Fence Components
There are a number of components that make up a steel palisade
fence with some different options to choose from. Palisade fencing
is available in many different heights up to 3.6m. We supply the
majority of our palisade fencing in runs of either 50m, 100m or
200m with all the component parts included. There are palisade
rails,palisade pales,fishplate,bolts and nuts.
The ‘W' section is often preferred to the more traditional ‘D'
section as it offers increased security as the fastener head is
more concealed and therefore more difficult to tamper with. The ‘W'
pale itself is a stonger more robust profile. We offer our palisade
with a choice of heads:
We supply all our palisade galvanised to BS 729. some of polyester
coat to a range of standard colours are shown below.
Our palisade fences are fixed using bolts and Permacone security
fixings.
3. Steel Palisade - Construction
It is supplied in 2.75m wide standard bays, each of which consists
of, one post, two angle rails, one or two centre supports dependent
upon the height of fence supplied, seventeen corrugated palisades,
two rail connecting plates, two M/12 cup square bolts with
permacone nuts for fixing rails to posts via the connecting plates
and thirty four M/8 saddle or tee head bolts with permacone nuts
for fixing the palisades to the angle rails.
A. 12mm permacone antivandal nuts & bolts to fix rails to
fishplate
B. 8mm permacone antivandal nuts & bolts to fix pales to rails
4. Palisade Fence Loading