Ndt Magnetic Particle Testing Ndt Huatec Yoke Magnetic Particle Flaw Detector Hcdx-Y7

HUATEC Magnetic Yoke Flaw Detector HCDX-Y7

Overview

HCDXseries magnetic yoke flaw detectors is the portable miniature magnetic detection equipment,which uses magnetic yoke to magnetize workpiece made of ferromagnetic materials. The equipment can magnetize various parts and is applicable to the petroleum, chemical, metallurgy, aerospace, shipbuilding, railway, electric power, coal, machinery, standardize parts, aircraft manufacturing, automobile parts, boiler and pressure vessel these industry products. The equipment makes magnetic particle inspection on the surface and the near surface defect, the defect is caused by forging, quenching, welding and fatigue, such as a chain rod, crankshaft, bearing, high strength bolt, spring, forgings, petrochemical pipe fittings, valves, blades, gear, roller, chain and Welding seam these geometric complex workpieces.

HCDXseries magnetic yoke flaw detector consists of AC (Alternating Current), DC (Direct Current), AC-DC magnetic yoke flaw detector. DC power supply is the rechargeable battery, applicable to site operation in the field with no power supply and the containers, bridges, pipelines that high pressure cannot enter in. If charging one time the continuous work can be up to more than 6 hours. AC power supply uses AC~220V power supply direct input, no other ancillary equipment and with easy, convenient operation, it is light weight and easy to carry, so the equipment can be widely used.

Technical Parameters

Basic Configuration

Operation and Cautions

Before using, the movable joint pin part shall be added a small amount of lubricating oil.

Pressing the switch after the probe pole head has kept good connection with the workpiece, timely releasing the switch before the probe has left the workpiece. To avoid the equipment overheating fault damage caused by improper operation.

V Charging method and low battery judgment

After connecting the charger (adapter) with the battery, the charger (adapter) plug is inserted into the 220V socket, the red light on the charger turns on, when red light turning green it indicates the end of charging, the charging time is about 3 hours.

When in the use of battery box power supply, the battery indicator display 10%, it needs to be charged, the charging time is about 3 hours