LCD Huh-6m Uci Portable Hardness Testing Machine Ultrasonic
Brand Name:HUATEC
Certification:ISO,CE
Model Number:HUH-6M
Minimum Order Quantity:1 set
Delivery Time:5-10 days
Payment Terms:T/T, Western Union,Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Supplier`s last login times:
within 21 hours
Product Details
Company Profile
Product Details
HUH-6M UCI hardness test Portable Ultrasonic Hardness Tester hardness test instrument
Characteristics of UCI method
1. Directly test Vickers hardness value of workpiece, and there is
no need to convert like Leeb or Shorehardness tester. The
conversion error is eliminated.
2.High test speed -- output test results within seconds
3.Standard Vickers indentation, tiny indentation, little damage to
the workpiece
4.The test results are related to the elastic constants of the
workpiece. New workpiece needs to be calibrated according to the
elastic constants.
5.Small volume, light weight and easy to carry.
6.Easy to test on assembly line.
7.It can be used for testing on site and testing large workpiece
and can be used to make hardness measurements on positions
difficult to access, such as tooth flanks or roots of gears.
8.Only measuring the hardness condition of the surface contacted
9. The development of microcontroller technology makes it easy to
calibrate workpiece with different elastic constants.
Ultrasonic Hardness Tester
Host and Accessories
Ultrasonic hardness tester is composed of host, probe and probe
connection cable.
The probe is connected to the host with an eight-core connection
cable for signal transmission. The host adopts a color display with
rich display content.
There are nine buttons on the front of the host to operate.
A USB interface is on the side of the host for charging and
communication.
The charge lamp near the USB interface is used to indicate charging
status.
Probe
| Probe | 1kgf manual probe | 2kgf manual probe | 3kgf manual probe | 5kgf manual probe | 10kgf manual probe |
| Accessory | Optional | Standard | Optional | Optional | Optional |
| Test force | 9.8N | 19.6N | 29.4N | 49N | 98N |
| Diameter | 22mm | 22mm | 22mm | 22mm | 22mm |
| Length | 150mm | 150mm | 150mm | 150mm | 150mm |
| Resonating rod diameter | 2.4mm | 2.4mm | 2.4mm | 2.4mm | 2.4mm |
| Maximum roughness of test surface | Ra<3.2μm | Ra<5μm | Ra<5μm | Ra<10μm | Ra<15μm |
| Minimum workpiece weight | 0.3kg | 0.3kg | 0.3kg | 0.3kg | 0.3kg |
| Minimum workpiece thickness | 2mm | 2mm | 2mm | 2mm | 2mm |
| Application | Ion nitriding die,formwork, fixture,thin-walled workpiece,bearing,tooth flanks, pipeline | Ion nitriding die,formwork, fixture,thin-walled workpiece,bearing,tooth flanks, pipeline | Ion nitriding die,formwork, fixture,thin-walled workpiece,bearing,tooth flanks, pipeline | Groove, tooth flanks, roots of gears | Small forgings, foundry materials, weld inspection,HAZ, low requirement for roughness |
Functional Characteristics
1.Main hardness scale: HV
Convertible hardness scale: HRC, HRA, HRB, HBW
2.In multi-points calibration mode, any hardness scales can be
chosen.
3.Testing range: HV50~1599, HRC20~68, HB85~650
4.Test direction:Support 360° test, as long as the angle between
the indenter and the surface doesn’t exceed 90° ± 3°.
5.Battery: 3.6V, 3000mAh lithium battery
6.Endurance: 10 hours
7.Test data can be exported to computer terminal.
8.Norms: DIN 50159-1-2008; ASTM-A1038-2005; JB/T 9377-2010;
JJG-654-2013;JJF 1436-2013.
10.Tiny test indentation---- requires a high-power microscope to
see.
11.Little damage to the workpiece.
12.High test speed----output test results in 1s at the soonest.
13.New appearance design, innovative sculpt, convenient to hold and
good craft.
14.Full English display, menu-type operation, few keys, simple and
convenient to operate.
15.inches large LCD screen with 320×480 color graphics dot matrix,
beautiful font and graphics, rich information and clear display.
16.Directly display the current measured value, cumulative measured
value, maximum value, minimum value, average value and conversion
value.
17.50 sets of data storage.
18.Simple calibration----5 sets of one-blockcalibration data, 1 set
of default calibration data and 5 sets of multi-blocksscalibration
data can be stored in the host.
19.For materials with different elastic constants, just anone-block
calibration is required to adapt to the new material.
20.For unknown material or material without conversion table, the
hardness scale can be arbitrarily selected for multi-points
calibration to eliminate the systematic error brought by the
conversion table.
21.Easy to test on assembly line.
Accuracy
| Model | Ultrasonic Hardness Tester | |||||||||||||||||||||||||||||
| Test range: | HV50-1599,HRC20-68,HB85-650,HRB41-100,HRA61-85.6, HS34.2-97.3,MPa255-2180 | |||||||||||||||||||||||||||||
| Accuracy | ±4%HB,±1.5HR,HV please refer to the table below | |||||||||||||||||||||||||||||
Accuracy |
| |||||||||||||||||||||||||||||
Application
1.Hardness test of flange edge and gear root stamping parts, mold,
thin plate, face-hardened gear tooth, gear groove and taper part
2.Hardness test of axle and thin-wall pipes and vessels
3.Hardness test of wheels and turbine rotors
4.Hardness test of bit edge
5.Hardness test of welding parts
6.Measure the depth of deep hole with certain aperture, concave and
convexwith large radians, and irregular plane
7.Hardness test of most ferrous and nonferrous metals and their
alloys in industrial production
8.Hardness test of thin coatings
9.etc.
LCD Huh-6m Uci Portable Hardness Testing Machine Ultrasonic
Inquiry Cart
0