ECG Medical Equipment Hospital Patient Simulator With Respiratory Wave

ECG Medical Equipment Hospital Patient Simulator With Respiratory Wave

ECG simulator 10 leads ECG machine simulator with Respiratory wave patient monitor simulator build-in battery

Specification of medical simulator:

The simulator can generate waveform as below, the first code represent waveform as below
1.Normal ECG waveform
2.Plus-minus triangular waveform
3.Heart rate uneven analog triangular waveform
4.Square wave, used the square wave to measure scan speed
5.Sinusoidal wave, measure amplitude-frequency characteristic
6.Respiratory wave
7.Calibration waveform 1MV
8.Setting signal range

Dimension: 15x10x3cm
N.W.: 0.35kg


Note:
1.The simulator will automatically generate Normal ECG waveform when connect to power
2.The LED display will be off automatically if without operation after 5 seconds, press any key will be returned to display
Key Description:

There are 4 keys, followed by selection keys, increase key, reducing key, the Enter key, in addition to a set of key combinations

Select Key:

This key is used to select the parameter you want to change; there are 4 LED tubes to display the four codes represent what is displayed,
The 1st LED representative waveform code, LED 2-4 representatives the parameter (2 is the value of one hundred, 3 representatives of ten, 4 representatives of bits)

Operation of each waveform and adjustable range

1.Normal ECG waveform
* Heart rate setting range: 10-200bpm (Initial value: 60 bpm)
* Signal amplitude is fixed

2. Plus-minus triangular waveform
* Frequency range: 10-300bpm (Initial value: 75 bpm)
* Amplitude range: 0.1-4Mv (10:0.1mV, 400:4mV)
* 2 modes, Mode 1: Positive waveform; mode II: negative waveform; Use combinations key to choose.

3. Heart rate uneven analog triangular waveform
* Frequency range: 20-250bpm; (Initial value: 80 bpm)
* Amplitude range:0.1-4Mv (10:0.1mV, 400:4mV)
* 2 modes, Mode 1:big waveform in upside, Mode 2: big waveform in downside, Use combinations key to choose.

4. Square wave
* Frequency range: 0.1Hz-10Hz (10:0.1Hz, 100:10Hz); (Initial value: 1 Hz )
* Amplitude range: 0.1-4Mv (10:0.1mV, 400: 4mV);

5. Sinusoidal wave
* Frequency range: 1-100Hz (Initial value: 10 Hz)
* Amplitude range: 0.1-4Mv (10:0.1mV, 400:4mV)
* Can be superimposed on the DC component of the waveform, range is 0.1mV-3mV (10:0.1mV, 400: 4mV);
* Use the combinations key, select the parameter need to be changed, model 1: Frequency; model 2: superimposed DC component(10:0.1mV ,400:4mV);

6. Respiratory wave:
* Frequency rang: 1-100times/minutes. (Initial value: 10 bpm);
* Note: ignore the ECG signal at this moment

7. Calibration waveform 1MV 100US
* Frequency range: 60bpm;

8. Signal range setting
* Amplitude range: 0.1mV-4mV (10: 0.1mV, 400: 4mV) ; (Initial value: 100)
* Note: this amplitude setting will affect all waveforms except ECG waveform

Feature:

Precise Life——Global Medical Equipment Accessories Solution Expert

Since its establishment in 2010, Precise Life has been committed to providing **high-quality medical equipment accessories and parts** to global medical institutions, distributors and service providers, helping global medical equipment to operate efficiently and protecting the lives and health of patients. With our professional technical capabilities, strict quality standards and efficient service network, we have become a trusted partner in the medical industry in more than 60 countries.

Our products cover **all categories of medical equipment accessories and parts**, focusing on providing key technical support for the following equipment:
- **Ventilator accessories**: flow sensor, pressure sensor, motherboard, filter module, breathing circuit components, etc.
- **Anesthesia machine accessories**: various boards, evaporator modules, gas valves, pressure sensors, breathing airbags, etc.
- **Monitor accessories**: ECG lead wires, blood oxygen probeSpo2 sensos, blood pressure cuffs, display modules, etc.
- **Medical ultrasound instrument accessories**: ultrasound probes, connecting cables, touch screens, etc.

At the same time, we provide **sensors, circuit boards, connecting cables, mechanical components** and other diversified precision parts, suitable for mainstream brand equipment models such as GE, Philips, Siemens, etc.

All products have passed ISO 13485 medical device quality management system certification, and comply with international standards such as FDA and CE to ensure safety and reliability.

Relying on the global logistics supply chain, we provide efficient logistics and flexible order services to meet urgent needs.

In addition to the supply of accessories, we provide **one-stop equipment maintenance services**, with a team of senior engineers to diagnose, replace parts and optimize performance, repair parts, and reduce operation and maintenance costs.

Precise Life has always been committed to "**keep medical equipment running and reduce health maintenance costs**" and promote the efficient use of global medical resources through innovative technologies and services. In the future, we will continue to deepen our roots in the field of medical accessories and contribute to protecting human health.

**Contact us**
Whether you need standard accessories procurement or maintenance support, the Precise Life team is always ready to provide you with professional answers!