Heavy Oil Commercial Thermal Steam Boiler Power Plant With Gauge Valves

Heavy Oil Commercial Thermal Steam Boiler Power Plant With Gauge Valves

Applications:
Marine/Industry
Specifications:

◎. Oil Fired Boiler
Light oil or heavy oil is suitable for this boiler plant. The boiler can be used for heat supply, oil heating and daily life service.
Brief Introduction of Boiler Structure
The boiler body consists of boiler shell, furnace and pin tubes with an all welded type structure. The pin tube being assembled inside theΦ219 or Φ273 smoke tube separately, consists of closed-pitched columnar steel pins which are welded on the outside surface of a steel tube. The boiler furnace is a full water cooling furnace consisting of a cylindrical furnace and upper, lower end which increases heat transfer efficiently.
The convection-heating surface of boiler consists of smoke tubes and pin tubes. The high temperature smoke from furnace enters into smoke tubes, flush the internal surface of smoke tubes and the pin tubes at the same time, forming a high efficient convection-heat exchange tube group.

The setting & function of boiler accessories
a. Main steam valve — on the top of boiler, which can transfer the steam from boiler to steam main pipe.
b. Safety valve — on the top of boiler, which can discharge all the steam at full load when the boiler is over pressure.
c. Water level gauge and water level controller — on the steam-water interface, which is used for boiler water level indication and for the supervision by boiler operator. The water level controller is used to transmit the value of boiler water level. The control system will control the feeding water pump or do burner emergency stop according to the signals received respectively.
d. Feeding water stop valves and check valves — on the shell side, one set for main feed water and another set for standby purpose.
e. Scum valve — to be used for draining off the suspension of oil sludge.
f. Blow down valve — to be used for draining off the boiler’s deposition and dirt.
f. Gauge valves — on the top of boiler, to be used for connecting the instruments with steam inside the boiler.
g. Air vent valves — to be used for discharge the air inside the boiler when pressure is increased.
There are manholes and hand holes on the boiler shell in order to maintenance the inside parts of boiler conveniently.
In order to decrease the heat loss of boiler and to low the surface temperature of boiler, the outside surface of boiler should be packed with insulation material and covered with thin galvanized steel plate.

KANGWEI ENVIRONMENT ENERGY UNITED GROUP

KWEE has engaged in design and production for more than 20 years, With the many years accumulated mature development, the business range had included the large power diesel engine generator set and relevant auxiliary fuel oil system equipment as well as the environment protection

KWEE cover the land area of 187500m², with building area of 155000m². Annual sales turnover is more than 60 million Yuan RMB. There are more than 450 employees, 50 of which have high-grade professional title, and 120 have middle-grade professional title. There are more than 2,000 large-sized production of engine equipment and auxiliries. The company is capable of manufacturing more than 5,000 engine generator set, more than 2,000 separators or purifiers ,additionally more than 1,000 non-standard equipment used in the marine and power plant each year.

It has over 50 proprietary technologies,Our company had passed the international quality system identification, such as ISO14001and ISO9001. All equipments which designed and manufactured by us apply to the system of diesel generator set and land based HFO fired power plant, also specialized for the manufacturing diesel engine generator set , combined fuel oil and LO system treatment module, fuel oil booster unit, combined LO/cooling water module which controlled by manual and PLC automatic, centrifugal oil purifier unit, boiler system; most of the products build up the good reputation in the market and have recognized by the international classification society at home and abroad, such as CCS,BV,ABS,ASME etc, KWEE had become a one-stop integrated solutions provider for the marine power system and HFO power plant.

KWEE also mainly focuses on the development of environment protection businesses especially the environment energy and water, developed the integrated ability for the environment technology designing, development, currently have the enough specialized ability to finish the environment project construction and engineering, such as biomass power generation

KWEE will positively continue to promote the healthy and good development for the system of diesel engine genset and environment protection, expect to build up good business cooperation with you in the future with our higher quality services.

* THE JOINT STOCK GROUP COMPANY LIST

QINGDAO BOYANG DIESEL ENGINE CO.,LTD

----- DIESEL ENGINE DESIGN AND MANUFACTURING

WUXI KANGWEI ENVIRONMENT ENERGY EQUIPMENT CO.,LTD

----- LARGE GENERATOR AUXILIARY SYSTEM AND ENVIRONMENT PROTECT SYSTEM

WUXI WEILIT BOILER CO.,LTD

----- BOILER MANUFACTURING FACTORY

WUXI JINGGAN SEPARATOR EQUIPMENT CO.LTD

----- CENTRIFUGAL SEPARATOR AND PURIFIER MANUFACTURING FACTORY