Supports LED Hot Swap 1-10V PUSH 25W LED Dimmer Driver Module With Short Circuit Protection
Brand Name:Merrytek
Certification:Semko, CE, RoHS
Model Number:ML25C-PV2
Minimum Order Quantity:Stop production, not available.
Delivery Time:1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit.
Payment Terms:T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
Supports LED hot swap 1-10V PUSH 25W LED Dimmer Driver Module
with Short Circuit Protection
Description:
- Flicker-free for whole dimming range
- Stand-by power below 0.5W
- Primary & secondary dimming with push button
- 1-10V dimming
- Dim via a potentiometer
- Supports LED hot swap
- Protection: short circuit/ over temperature/ over voltage
- Derating current for over high ambient temperature.
- Dimming level memory at mains restores
- Multi-output currents set via dip switches
- 5-year warranty
Applications:
For LED down light, LED panel light, led strip, led tube etc…
Dimming Operation:
1) Push button switch for dimming
- ON/OFF: Short push (0.12s~0.4s) on the switch.
- Dimming: Long push (>8s and <15s) on the switch. Dimming range 2%-100%, it takes 8s from the darkest to the brightest. Self recovery when blackout.
- Synchronization: If there is Led driver is not synchronized when the same PUSH switch is connected to the driver, long press the PUSH switch (>15S), the LED driver will stay at 50% brightness. (LED current will be the 50% of the maximum current), and achiever automatic synchronization.
2) 1-10V dimming
When the LED driver is on, it can achieve dimming by rotating the
1-10V dimmer, the dimming range is 2-100%. When the 1-10V dimmer
output is 1V, LED will be adjusted to the darkest and LED current
will be the 2% of the maximum current. When the 1-10V dimmer output
is 10V, LED will be adjusted to the brightest and LED current will
be the 100% of the maximum current.
| Input | Operating Voltage | 198-264VAC 50Hz /60Hz |
| Input Voltage | 220-240VAC 50Hz /60Hz | |
| Input Current | 0.15A @230VAC | |
| Input Inrush Current | <8A (Half current pulse width 50US ) @230VAC | |
| Power Factor | ≥0.90 @230VAC(Full load) | |
| No-load power | ≤1.5W | |
| Stand-by Power | ≤0.5W | |
| Efficiency | 85%Max. @230VAC(Full load) | |
| Wiring Method | Colourful press fit terminal Wire Diameter:0.75-1.5mm2 | |
| Output | Operating mode | Constant Current |
| Load type | LED | |
| Ripple requirement (Flickering or Flickering-Free) | Flicker value: less than 2% for whole dimming range | |
| No-load output voltage | 68VDC Max. | |
| Load output voltage range | 6-58VDC | |
| Full load output power | 25W Max. | |
| Load output current | Set via DIP switch, 250MA±5% (6-58V); 350MA±5%(6-58V);500MA±5%(6-50V);700MA±5%(6-36V) | |
| Constant current/voltage Precision | Constant Current Precision ±5% | |
| Wiring method | Colourful press fit terminal Wire Diameter:0.75-1.5mm2 | |
| Control Method | Primary PUSH Dimming | Dimming range 2%-100% |
| 1-10V(0-10V)Dimming | Dimming range 0-100% | |
| Primary PWM Dimming | 1-10V port PWM dimming(3HZ-8KHZ) | |
| Potentiometer | Yes, 100kΩ | |
| Exception Protection Requirements | Input Over voltage Protection | 300VAC 50Hz/60Hz 2 hours |
| Output Over voltage Protection | N/A | |
| Output over load protection | Yes, self recovery | |
| Output no load protection | Yes, self recovery | |
| Output over temperature protection | Yes, self recovery | |
| Output short circuit protection | Yes, self recovery | |
| Output LED hot swap | At least 2 series LED lamp (6V), electrothermal hot swap does not damage the LED lamp | |
Operating | Operating temperature/ humidity | -25℃+50℃ Humidity : 85% (Non-condensing) |
| Storage temperature/ humidity | -40℃+80℃ | |
| Outer Max. Temp(Tc) | 85℃ Max. | |
Safety | Isolation pressurization | 3750VAC 5mA 60S (Input“L N”, Output “SEC+ SEC- 1-10V”) |
| EMC | EN55015 EN61547 EN61000-3-2 EN61000-3-3 | |
| DALI protocol standard | IEC62386-102IEC62386-207 | |
| Safety requirement | EN61347-1 EN61347-2-13 | |
| Certificate requirement | Semko, CE, RoHS | |
| Others | IP rating | IP20 |
| Protection level | Class II | |
| Packaging requirement | Independent installation | |
| Installation dimension | 110mm(Outer dimension:103*67*22 mm) | |
| Blackout memory function | Yes, PUSH blackout memory | |
| Dimming synchronization | PUSH switch dimming,supports 15 drivers synchronization | |
| Packaging requirement | Bubble Bag Clapboard Outer Carton(K=A) | |
| Weight | ||
| Life | 50000h @Ta full load |
Supports LED Hot Swap 1-10V PUSH 25W LED Dimmer Driver Module With Short Circuit Protection
Inquiry Cart
0