46W Dali Dimmable Driver Adjustable 700mA to 1050mA Operating Voltage 198-264VAC
Brand Name:KREATPOWER
Certification:ENEC, SEMKO, CB, CE
Model Number:KL46C-PDii
Minimum Order Quantity:100pcs
Delivery Time:1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit.
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
700mA to 1050mA adjustable 46W Dali dimmable driver
【Product Feature】
- Flicker-free for whole dimming range
- Stand-by power below 0.5W
- Primary dimming with push button
- Built-in DALI interface DT6
- Protection: short circuit / over temperature/ over voltage
- Derating current for over high ambient temperature
- Push dim with memory function
- 5 year warranty
- Parameters
| Input | Operating Voltage | 198-264VAC 50Hz /60Hz | |||||
| Rated Input Voltage | 220-240VAC 50Hz /60Hz | ||||||
| DC Input Voltage range | 200-240VDC | ||||||
| Input Current | 0.23A Max. | ||||||
| Input Inrush Current | <20A (Half current pulse width 100US) @230VAC | ||||||
| Power Factor | ≥0.95 @230VAC (Full load) | ||||||
| Total Harmonic Distortion | Typical: 13% (@230Vac, 100% load) | ||||||
| Stand-by Power | ≤0.5W(@230Vac) | ||||||
| Efficiency | 87%Max. @230VAC (Full load) | ||||||
| Wiring Method | Push terminal, wire cross section:0.75-1.5mm2 | ||||||
| Circuit Breaker | type | B10 | B13 | B16 | B20 | B25 | |
| Number | 30 | 45 | 50 | 65 | 80 | ||
| Diameter | 1.5mm2 | 1.5mm2 | 2.5mm2 | 2.5mm2 | 2.5mm2 | ||
| type | C10 | C13 | C16 | C20 | C25 | ||
| Number | 20 | 25 | 30 | 40 | 50 | ||
| Diameter | 1.5mm2 | 1.5mm2 | 1.5mm2 | 1.5mm2 | 2.5mm2 | ||
| Output | Operating Mode | Constant Current | |||||
| Load Type | LED | ||||||
| Ripple Requirement (Flickering or flickering-Free) | Flicker value: less than 2% for whole dimming range | ||||||
| Start Up Time | <1s (@230Vac) | ||||||
| No-load Output Voltage | 68VDC Max. | ||||||
| Load output voltage range | 9-53VDC | ||||||
| Full load output power | 46W Max. | ||||||
| Load output current | 700m(9-53V) 750m(9-53V) 800mA(9-53V) 850mA(9-53V) 900mA(9-50V) 950mA(9-48V) 1.0A(9-46V) 1.05A(9-44V) | ||||||
| Output current/voltage tolerance | ±5% | ||||||
| Wiring method | Push terminal, wire cross section:0.75-1.5mm2 | ||||||
| Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max.lead length:20M) | |||||
| 1-10V Dimming | NO | ||||||
| Dimming Range | Primary PUSH & DALI dimming: 0%-100% | ||||||
| Potentiometer | NO | ||||||
| DALI Dimming | DALI dimming (Max.lead length:300M) | ||||||
| Exception Protection Requirements | Output over temperature protection | Yes, without self recovery function(Can be inquired) | |||||
| Output short circuit protection | Yes, without self recovery function(Can be inquired) | ||||||
Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity:85% (Non-condensing) | |||||
| Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | ||||||
| Max. case temp(Tc) | 85℃ | ||||||
Safety & EMC | EMC standard | EN55015 EN61547 EN61000-3-2 EN61000-3-3 | |||||
| DALI protocol standard | IEC62386-102 IEC62386-207 DT6 | ||||||
| Safety standard | EN61347-1 EN61347-2-13 | ||||||
| Certification | ENEC SEMKO CB CE | ||||||
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | ||||||
| Others | Degrees of protection | IP20 | |||||
| Type of protection | Class II | ||||||
| Installation type | Independent installation | ||||||
| Installation dimension | 123*79*24mm | ||||||
| Blackout memory function | Yes, PUSH blackout memory | ||||||
| PUSH dimming synchronization | 20 units Max. | ||||||
| Packaging requirement | white box+ Instructions Clapboard Outer Carton(K=A) | ||||||
| Weight | 155g | ||||||
| Life | 50000h @Ta full load | ||||||
| Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified. | |||||||
- Dimension (Unit:mm)
- Wiring Diagram
Fig. A DALI Dimming Fig.B Push Dimming
- Derating
- Dimming curve
- Current gear setting:
| Current / voltage gear setting | 1 | 2 | 3 |
| 1050mA | ON | ON | ON |
| 1000mA | - | ON | ON |
| 950mA | ON | - | ON |
| 900mA | - | - | ON |
| 850mA | ON | ON | - |
| 800mA | - | ON | - |
| 750mA | ON | - | - |
| 700mA | - | - | - |
- ON/OFF & Description of Dimming Operation
A. Short press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.
B. Dimming: Long Press PUSH switch (1S-8S) to dim and the dimming range is 2-100%.
C. Memory: PUSH dimming has dimming memory function.
D. Dimming synchronization: Long Press Push switch at least 15S to go into the pushing dimming synchronization.
E. DALI dimming mode: Connect the power supply to the DALI system and the dimming range is 0-100%.
- Attentions
1) The driver must be connected to the fixtures before turning on the input power, otherwise the fixtures may be damaged.
46W Dali Dimmable Driver Adjustable 700mA to 1050mA Operating Voltage 198-264VAC
Inquiry Cart
0