

Add to Cart
Eps Mgo And Cement Dry Wall Panel Production Line Fully Automatic Low Noise
Wall Board Production:
1) Wide raw material resource
2) Easy process technology
3) Skillful installation engineer
New-type (Mgo) Sandwich Wall Panel/fiber cement sandwich wall board
machine
I. Equipment Feature
This machine adopts the technology of double-drive
double-roller-extruding, and the product is formed once after
sizing, material feeding, spreading no-woven cloth, compounding and
repressing. The equipment runs stablely with high automatization
degree, and the specification of its product can be adjusted
arbitrarily. The equipment actually realizes the industrial
production-line of new model building wall board, and the product
have even and glazed surface with high compactness. The equipment
largely reduces the labor intensity of worker and thoroughly
changes many shortages of the former casting forming with upright
mould or flat mould, such as large mould usage, low recycling rate,
required electrical heating or steam heating, single kind of
product as well as the sound insulation and heat-preserving which
don't meet the market requirements
Brief Introduce about MGO board Making Machine equipment
Mgo board making machine equipment can produce all kinds of magnesium oxide
boards, they can be used for ceiling, wall skirting, decorating of indoor wall and lining
board for furniture. It can replace three-ply board, five-ply board, flake board, MDF
(Medium Density Fiberboard ) and Gypsum Board. It is really environment product and
lower cost.
Mgo board making machine equipment Production Conditions
1. The production line for mgo board is composed of board-making machine,glue-
spreading and veneering-drying machine and glazing machine.
2. The production line for mgo board has :production workshop ,finished product
workshop and raw material warehouse . workshop:100---1000m2,worker:3--
-6person,water:ordinary water,electricity:1.1—10KW(according to different scale)
Technology index
serial number | Inspection items | Standard requirement (thickness 8mm) | inspection results | |
1 | Flexural strength | >8.0 | 10.3 | |
2 | Impact strength | >1.5 | 4.84 | |
3 | performance density | 0.7<p<1.0 | 0.92 | |
4 | Back to halogen resistance | No water, no get damp | No water, no get damp | |
5 | Dry shrinkage | <0.3 | 0.21 | |
6 | Wet bilge rate | <0.6 | 0.40 | |
7 | With screw force | >15 | 61 | |
8 | The chloride ion content | <10 | 2.96 | |
9 | The factory of moisture content | <8 | 7.5 | |
10 | incombustible | The average temperature in the furnace | <50 | 8 |
The average combustion duration | <20 | 0 | ||
The average mass loss rate | <50 | 47.5 |
Working Process of the Mgo Board Making Machine
Features of the Mgo Board
Customer Visit
Why Choose Us?