

Add to Cart
Horizontal Multistage Diesel Engine Water Pump Set
Deutz/Cummins/Ricardo Diesel Engine Driven Self-Priming Pump Set For Irrigation(Manufacturer)/Water Pump Generator/Hose Pump/Water Pump Set
Product introduction:
P series self priming non-clog centrifugal sewage pump is a new
generation product which develop on the basis of the lastest
technology and craftwork. Because of the reliable performance, its
life lasts more than 20 years.
We take special usage of the sewage pump into consideration on
design, so we add a hole to make sure that stronger sewage can be
cleaned quickly when pump is jammed.
The unique lubrication oil mechanical seal cavity makes the
performance more reliable and avoids to damage mechanical seal when
it operates without water. To ensure a smooth operation, low noise,
long life, all the main components such as imported bearing, to
overcome the traditional inherent shortcomings such as low flow
rate capacity, difficult to install, difficult maintenance and
frequent failure.
P series self-priming Pump has the character of strong
anti-clogging. In order to avoid towels, bags and so long fiber
pollution caused by debris blocking the sewage pump sewage poor. We
Design will cut down pollution-pore structure In front of the pump
to ensure that the debris can be cleared more quickly.
There is a big vortex chamber play important role. It is no need to
equip check valve in the inlet and outlet to sewage efficiently
when the pump separately completely.
Main usage:
1. Municipal Project, Sewage Project, Instruction Project
2. Transportion of the sewage of uptown
3. Sewage transportion in Hospital, hotel and so on
4. Classification of municipal sewage treatment factory and
concentrate treatment systems engineering.
5. Transportation of the factory and contaminated water
Operation condition:
1. The temperature of medium no more than 80° C, the density of
medium is 1.0~1.3*103 Kg/m3, PH is within 5~9,
2. Max diameter of solid should be less than 75 mm,
3. Max suction lift no more than 7 m
Technical data:
1: Inlet/Outlet: 2'', 3'', 4'', 6'', 8'', 10'', 12''
2. Impeller Diameter: 158.75-457.2 mm
3. Rotary per minute: 650-2900 r/m
4. Flow rates: 46-1275 m3/h
5. Head: 33-62 m
6. Motor: 1HP-125HP
7. N. W:600KG-1600KGS
8. G. W: 850-2000KGS
9. Max Solid: 20.63-76.2 mm
10. Material: cast iron
11. Diesel: water-cooled