WE43 Magnesium Alloy Sheet Fit Helicopter Transmissions / Power Systems

Magnesium Alloy Sheet WE43 For Helicopter transmissions / power systems

Magnesium Plate WE43

WE43 is a wrought magnesium base alloy with good room-temperature strength and ductility combined with corrosion resistance and weldability. Increased strength is obtained by strain hardening with a subsequent partial anneal (H24 and H26 tempers).

Specifications:

Commodity : Coated Magnesium Alloy Plate for Etching

Content: Magnesium Alloy

Process : Extruded

Application: Etching Plate

Type : WE43

Size Range:

Sheet: thickness from 0.5mm to 7mm; Max. width is 600mm; Max. length is 1200mm;

Chemical Composition:

Al: 2.5-3.5%; Zn: 0.7-1.3%; Mn: 0.20 – 1.0%; Mg: Balance

PHYSICAL PROPERTIES:

Density: 1.78

Coefficient of thermal expansion: 26.8 x 10^-6K^-1

Specific heat: 1040 Jkg^-1k^-1

Thermal conductivity: 76.9Wm^-1k^-1

Electrical resistivity: 92nΩm

Modulus of elasticity: 45 x 10⁹Pa

Poissons ratio: 0.35

Melting range: 566 - 632°C

Application:

WE series magnesium alloys are magnesium based with Gadolinium, Yttrium, Zinc and Zirconium. It covers WE43,WE54 and WE94.All those are high strength casting alloys which can be used in temperatures of up to 300oc (572of). The alloys have good mechanical properties coupled with excellent corrosion resistance. The alloys are widely applied in : Helicopter transmissions, power systems, aero-engines, sports cars, missiles.

China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.

Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.

Along with strong economic development in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.

Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..

Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.

Believe we can be your long term and reliable supplier .